Traditional Sand and Cement Packed Render Atlas - 25kg

25kg Traditional Sand And Cement Packed Render Atlas is a ready made traditional cement render for internal and external use that can be applied to all mineral substrates. It is made from a combination of Portland cement, hydrated lime, quartz aggregate and refining agents. It is easy to use, has good adhesion and highly durable. It is applied in a double layer rendering method: the initial scratch coat and the surface floating coat. Antifreeze agents can be added to the render, allowing for carrying out work at reduced temperatures, i.e. below + 5 C. Render thickness: 6mm to 30mm.

Note: 30kg bags marked M are available for machine rendering. Ask for a quote.

• Resistant to weather conditions,
• Easy to process,
• Good adhesion,
• High durability,
• Waterproof,
• Frost-proof.
  

• External and internal mineral substrates

• The substrate must be cleaned and properly prepared.
  
• Pour the dry mix into 4l of water.
• Mix with a low-speed mixer.
• Leave for 5 minutes and mix again.
• Do not mix hardened grout with water or fresh material.
• Apply the mortar in an even layer on the surface, and even out with a long float.
• Protect against frost, precipitation, excessive temperatures during application and drying. 

Once purchased this product is non-returnable.