PSC 4ECO 250T ECO OUTSIDE - Insulating Protective Paint - 18 Litres Bucket

PSC 4ECO 250T ECO OUTSIDE is a highly efficient non-toxic, environmentally friendly, energy-saving and flexible insulation paint that covers micro cracks with just one coat. PSC 4ECO 250T ECO OUTSIDE is a water-based insulating paint based on acrylic resin filled with microspheres. Microspheres are small spherical particles with surface modification for specialised applications, PSC 4ECO 250T ECO OUTSIDE insulating paint is fully washable and resistant to dirt and chemicals. The painted surface has excellent resistance to biological corrosion and condensation. It is suitable for use in climatic conditions where energy costs play an important role in maintaining a favourable temperature environment. Supplied in plastic buckets of 18 litres.

Consumption per 1 m2 (one coat on all suitable surfaces with a perfectly flat surface)

• At a thickness of 0.15 mm: 0.18 litres/1m2
  
• At a thickness of 0.20 mm: 0.24 litres/1m2
• At a thickness of 0.30 mm: 0.30 litres/1 m2

CHARACTERISTICS

• A water-based insulating paint based on acrylic resin,
• Highly efficient paint for external use,
• Non-toxic and environmentally friendly,
• Able to cover micro cracks with just one coat,
• Saves energy,
• High adhesion to all known materials,
• Excellent resistance to biological corrosion and condensation,
• Doesn't deteriorate during atmospheric changes,
• Ecological and safe for health,
• It can be dyed with any colour.

APPLICATION

• External walls and other surfaces of industrial and residential buildings,
• Can be used to paint mineral substrates: cement-lime plasters, cement, concrete, gypsum, clinker, etc.

INSTALLATION

• All surfaces must be clean and free of efflorescence (salt, dust, dirt, oil and grease).
• It is recommended to carefully assess the condition of the substrate in the case of surfaces undergoing renovation,
• Remove old coatings and any unstable elements,
• Remove greasy stains and coatings,
• In the case of difficult and persistent dirt, sandblasting should be used,
• In case of fungus, use appropriate fungicide preparations,
• Remove any unevenness using cement, cement-lime plaster or putty,
• Before applying the paint, the surface should be primed with universal, deeply penetrating primer or PSC-250T/ECI – INTERIOR paint diluted with water in a volume ratio of 1:1.
• Can be diluted with water before use.
• The amount of water used for dilution should not exceed 0.3l per 18 litre bucket.
• Mix with a mechanical mixer at low speed (up to 150 rpm) for 3-5 minutes and for 5-7 minutes with manual mixing.
• Do not apply the product in the rain.
• The temperature of the surroundings and the painted surface should be between +5 and +30 Centigrade,
• Relative air humidity should be below 80%.