Millboard Envello Shadow Line+ External Corner Profile - Burnt Cedar - 50mm x 50mm x 3050mm

Envello Shadow Line+ External Corner Profile - Burnt Cedar is a flexible polymer resin profile that measures 50x50x3050mm designed to finish off the external corners of a building when using Shadow Line boards. You can fix it in place using the perforated closure and 20mm screws. These corner profiles will help conceal exposed corners and protect against insects or rodents entering through gaps in the cladding while allowing for airflow. It replicates the look and feel of real wood, but is 100% wood-free, resists fading, warping, and splintering, and free from the risks of rotting or attracting insects and pests like real wood or wood composite. Resilient Lastane layer chemically melded to the core refers to a durable outer surface that provides protection and resilience. Millboard cladding is UK-made, reflecting British craftsmanship, innovation, and quality.

Available colours,

It is advisable to add 5-10% wastage allowance and add extra boards for window reveals depending on reveal depth.

• Composed of a unique blend of mineral polymer and natural fibres,
• Has a larger grain detail, enhancing its visual impact,
• Durable, resistance to moisture, and needs minimal maintenance,
• 100% wood-free, eliminating the risks associated with traditional timber, such as rotting, warping, and insect damage.
• Stands up to the harshest weather conditions,
• UV-stable, which means they won’t fade or degrade when exposed to sunlight,
• Colour fast,
• Easy to install, 
• Easily cut with a handsaw, guillotine, electric jigsaw or circular saw,
• Crafted with fire retardants, making them suitable for low-rise residential and some commercial properties,
• Require minimal maintenance due to their non-porous composition,
• Regular cleaning with water and a soft brush is sufficient.

• First, measure the length of the external corner where you want to install the profile.
• Cut the Envello Shadow Line+ External Corner to the required length using a saw.
• Ensure that the surface is clean and free from dust or debris.
• If you’re installing it on a cladding board, make sure the board is securely fixed to the wall.
• Apply a suitable adhesive to the back of the profile.
• Make sure to cover the entire surface that will be in contact with the wall.
• Press the profile onto the external corner, aligning it properly.
• Use a level to ensure it’s straight.
• You can also use temporary supports (such as wooden blocks) to hold it in place while the adhesive sets.
• Once the adhesive has dried, secure the profile in place using screws.
• Drill pilot holes through the profile and into the wall, then insert screws.
• Be careful not to overtighten and damage the profile.
• If necessary, fill the screw holes with wood filler or putty. Sand any rough edges for a smooth finish.

• Has been tested to BS EN 13501-1 and holds a classification of Euroclass D