Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Price: £105.25 (£126.30 inc VAT)
- Product Code: A1-3571
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 6mm x 1m - Kit
Our ratings on 25-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Thickness: 6mm
Length: 1000mm
6mm x 1m Stainless Steel Helical Bar is used for repairing cracks and reinforcing masonry in both new and existing masonry structures. The helical bar with its deformed fins makes the bonding far superior to standard reinforcing materials. The Masonry Crack Stitching System is fully certified.
The Masonry Crack Stitching Kit consists of
- 6mm x 1000mm Helical Bars - 5 nos,
- 1.5L tub of Helical Grout (HG3),
- Crack Stitching Gun,
- Black Plastic Nozzle,
- Mixing Paddle,
- Finger Trowel.
CHARACTERISTICS
- Grade 304 austenitic stainless steel,
- Excellent bonding capabilities,
- High stress material,
- No sudden or catastrophic failure point,
- Less intrusive than standard repairs.
- Rake or cut slots into horizontal mortar joint to a depth of between 25-35mm and a 450mm or 6 brick courses vertically.
- Vacuum out the slots and thoroughly flush with water.
- Mix the two part Grout (HG3) in the tub provided.
- Insert a bead of Grout into the back of the slot using a grout gun.
- Push the Helical Bar into the Grout to obtain good coverage.
- Insert a bead of Grout over the exposed Helical Bar and flatten it into the slot using a finger trowel.
- Fill in the slot with Grout leaving sufficient depth for re-pointing.
- Use a colour matched mortar to repair fractured bricks.
- Re-point the slot to match existing colour.
Guide Price
Brand: Teco
Model and Size: 195mm - Free Delivery
Delivery Time: 1 - 2 days
195mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs ..
Guide Price: £33.07
£39.68 inc VAT
Guide Price
Brand: Teco
Model and Size: 685x2438mm
Delivery Time: 1 - 2 days
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275. Gauge: 0.4mm ..
Guide Price: £9.79
£11.75 inc VAT
Guide Price
Brand: Teco
Model and Size: 700x2500mm
Delivery Time: 1 - 2 days
8x2 Stainless Sheet Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. In external applications and where there is regular exposure t..
Guide Price: £57.77
£69.32 inc VAT
Brand: Teco
Model and Size: 15mm - 3m
Delivery Time: 1 - 2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Brand: Teco
Model and Size: 3L
Delivery Time: 1 - 2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection into masonry voids. Helical Bar Grout is suitable for bonding metal components into substrates, such as concrete, brick, blocks or stone. Due to its thixotropic ab..
Brand: Teco
Model and Size: 13mm - Abutting
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Abutting is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall..