Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Price: £105.25 (£126.30 inc VAT)
- Product Code: A1-3571
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 6mm x 1m - Kit
Our ratings on 22-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
Masonry Crack Stitching Kit - 6mm Stainless Steel Helical Bar - 1m length
Thickness: 6mm
Length: 1000mm
6mm x 1m Stainless Steel Helical Bar is used for repairing cracks and reinforcing masonry in both new and existing masonry structures. The helical bar with its deformed fins makes the bonding far superior to standard reinforcing materials. The Masonry Crack Stitching System is fully certified.
The Masonry Crack Stitching Kit consists of
- 6mm x 1000mm Helical Bars - 5 nos,
- 1.5L tub of Helical Grout (HG3),
- Crack Stitching Gun,
- Black Plastic Nozzle,
- Mixing Paddle,
- Finger Trowel.
CHARACTERISTICS
- Grade 304 austenitic stainless steel,
- Excellent bonding capabilities,
- High stress material,
- No sudden or catastrophic failure point,
- Less intrusive than standard repairs.
- Rake or cut slots into horizontal mortar joint to a depth of between 25-35mm and a 450mm or 6 brick courses vertically.
- Vacuum out the slots and thoroughly flush with water.
- Mix the two part Grout (HG3) in the tub provided.
- Insert a bead of Grout into the back of the slot using a grout gun.
- Push the Helical Bar into the Grout to obtain good coverage.
- Insert a bead of Grout over the exposed Helical Bar and flatten it into the slot using a finger trowel.
- Fill in the slot with Grout leaving sufficient depth for re-pointing.
- Use a colour matched mortar to repair fractured bricks.
- Re-point the slot to match existing colour.
Brand: Teco
Model and Size: 10mm - 3m
Delivery Time: 1 - 2 days
10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£144.88
£173.86 inc VAT
Brand: Teco
Model and Size: 15mm - 3m
Delivery Time: 1 - 2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Brand: Teco
Model and Size: 12mm - 3m
Delivery Time: 1 - 2 days
12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length. Galvanised steel EN 103..
Guide Price
Brand: Teco
Model and Size: 220mm - Free Delivery
Delivery Time: 1 - 2 days
220mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs&..
Guide Price: £34.32
£41.18 inc VAT
Brand: Teco
Model and Size: 75mm - 90m
Delivery Time: 1 - 2 days
75mm wide open weave self-adhesive drywall scrim tape is used for reinforcing joints and patching repairs on plasterboard. 90m long roll. self-adhesive fibreglass mesh is thin and light, but extremely strong and easy to use and greatly increases joint strength and durability for less cracking.CHARAC..