All Products
CHOOSE MANUFACTURERS
Brand: Icopal
Model and Size: 1m x 10m - 200m2
Delivery Time: 7 - 10 days
Icopal Roofing Felt Underlay 3mm Hydrobit V60 S30 Bitumen - Torch On - 1m x 10m - Pallet of 20 rolls
Icopal Roofing Felt Underlay 3mm Hydrobit V60 S30 Bitumen - Torch On is an extra strength base bitumen roofing felt, made of glass fleece reinforcement, coated with SBS modified bitumen blend with mineral filler, top side is finished with sand, bottom side is finished with foil. A latest ..
Brand: Kreisel
Model and Size: 1200kg
Delivery Time: 7 - 10 days
Kreisel Poztynk 560 a ready made cement-lime traditional mortar for internal and external render that can be applied to all mineral substrates. It is resistant to water, so can be used in very humid rooms, in bathrooms or basements. It is easy to use, has good adhesion and highly durable. Creat..
Brand: Foliarex
Model and Size: 1.5m x 50m - 4125m2
Delivery Time: 7 - 10 days
Strotex V 135GSM Breather Membrane is an air tight, vapour permeable, lightweight breather membrane for fully supported and unsupported installations in roofs and also for walls as a wind-proof material. It is a high performance breather membrane, consists of 3 layers to achieve a high vapour permea..
£2,406.25
£2,887.50 inc VAT
Guide Price
Brand: Atlas
Model and Size: 1200kg
Delivery Time: 7 - 10 days
25kg Traditional Sand And Cement Packed Render Atlas is a ready made traditional cement render for internal and external use that can be applied to all mineral substrates. It is made from a combination of Portland cement, hydrated lime, quartz aggregate and refining agents. It is easy..
Guide Price: £497.00
£596.40 inc VAT
Brand: Teco
Model and Size: 10mm - 3m
Delivery Time: 1 - 2 days
10mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Brand: Teco
Model and Size: 12mm - 3m
Delivery Time: 1 - 2 days
12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length. Galvanised steel EN 103..
Brand: Teco
Model and Size: 13mm - Abutting
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Abutting is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall..
Brand: Teco
Model and Size: 13mm - Engaging
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Engaging is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall fini..
Brand: Teco
Model and Size: 15mm - Abutting
Delivery Time: 1 - 2 days
15mm Galvanised Steel Drywall Feature Bead - Abutting is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes.&..
Brand: Isomass
Model and Size: 1200x1000mm - 1.2m2
Delivery Time: 3 - 5 days
15mm Monodeck Mat 15 is a tri-layer underlay mat with an 8mm ACF foam core designed to reduce airborne and impact sound transmission through timber floors. The reconstituted 8mm ACF foam core will provide impact and airborne improvement. Monodeck Mat 15 is ideal for floor upgrades, for improving sou..
Brand: Teco
Model and Size: 16mm - 3m
Delivery Time: 1 - 2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation U..
Brand: Beck Products Ltd
Model and Size: 2440x1220mm - 2.98m2
Delivery Time: 1 - 2 days
3mm Correx is a lightweight and durable twin wall fluted polypropylene protection board that can be used both internally and externally for protection of floors, walls, doors, windows and ceilings and as a formwork material for concrete construction.APPLICATIONFor protection of floors, walls, doors,..
£5.58
£6.70 inc VAT
Brand: Teco
Model and Size: 20mm - Engaging
Delivery Time: 1 - 2 days
20mm Galvanised Steel Drywall Feature Bead - Engaging is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes. Made ..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x600mm - 12.96m2
Delivery Time: 3 - 5 days
25mm Unilin FR-BGM is a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation. FR..
Guide Price: £129.93
£155.92 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 12.96m2
Delivery Time: 3 - 5 days
25mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mechanical..
Guide Price: £129.91
£155.89 inc VAT
Brand: ZVM
Model and Size: 25mm x 25mm - 2.5m
Delivery Time: In Stock 1-2 working days
25mm x 25mm Flexible PVC Thin Coat Render and Plaster Corner Bead for Arches and Curved Walls - 2.5m
25mm x 25mm Flexible PVC Thin Coat Render and Plaster Corner Bead is use on all plastered and rendered corners on curved edges arches and walls to get a true sharp corner. It can be used to create decorative plaster curves and arches and protects the plaster and render at its most vulnerable po..
£3.20
£3.84 inc VAT
Brand: Isomass
Model and Size: 10m x 1m - 10m2
Delivery Time: 3 - 5 days
3.5mm Isocheck Underwood is a rubber crumb underlay for use with laminate and wood flooring to provide resilience, durability and support to protect against undue stress in wood and laminate flooring. Isocheck Underwood is manufactured mainly from recycled vehicle tyres bound in a unique latex formu..
Brand: Isomass
Model and Size: 1.37m x 10.95m - 15m2
Delivery Time: 3 - 5 days
6mm Isocheck Resmat 6 is a recycled eco friendly under board mat made from rubber crumb to reduce sound transmission through timber and concrete floors. It can support chipboard, OSB, MDF or Plywood floors. It enables a timber floor to meet the sound transmission regulations of Approved Document E 2..
Brand: Isomass
Model and Size: 1.2m x 1m - 1.2m2
Delivery Time: 3 - 5 days
7mm Isocheck Isomat 7 is a 6mm layer of Isofiba bonded to performance enhancing barrier membrane to reduce sound transmission through timber floors. It can support chipboard, OSB, MDF or Plywood floors. It enables a timber floor to meet the sound transmission regulations of Approved Document E ..
Brand: Isomass
Model and Size: 1m x 15m - 15m2
Delivery Time: 3 - 5 days
6mm Isocheck ResiScreed 6 is an under screed mat made from rubber crumb bonded to a DPM fibreglass backing to reduce the impact sound transmission through concrete floors. It is designed to be placed directly beneath the screed to isolate the screed from the structural sub floor. CHARACTER..
Brand: Isomass
Model and Size: 1m x 15m - 15m2
Delivery Time: 3 - 5 days
8mm Isocheck ResiScreed 8 is an under screed mat made from rubber crumb bonded to a DPM fibreglass backing to reduce the impact sound transmission through concrete floors. It is designed to be placed directly beneath the screed to isolate the screed from the structural sub floor. CHARACTER..
Brand: Isomass
Model and Size: 1m x 15m - 15m2
Delivery Time: 3 - 5 days
10mm Isocheck ResiScreed 10 is an under screed mat made from rubber crumb bonded to a DPM fibreglass backing to reduce the impact sound transmission through concrete floors. It is designed to be placed directly beneath the screed to isolate the screed from the structural sub floor. CH..
Brand: Cellecta
Model and Size: 600x1250mm - 12m2
Delivery Time: 2 - 4 days
30mm Cellecta Hexatherm XR is a specially designed closed cell extruded polystyrene board, ideal for for both internal and external wall applications for covering with plaster or render. The board's high comprehensive strength allows it to withstand withstand heavy point loads. The board is complete..
Brand: Isomass
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 3 - 5 days
37.5mm Isocheck Isoliner Thermal Laminate Board comprise a 25mm rigid PIR foam insulation board bonded to a 12.5mm tapered edge Gyproc SoundBloc. On the reverse face, the insulation has a multi-layer kraft paper and aluminium facing. This board can be used to line walls and ceilings. It can be ..
Brand: Various
Model and Size: 3.5x25mm - coarse point
Delivery Time: 1 - 2 days
3.5x25mm Coarse Thread Sharp Point high quality screws have been specially developed for fixing plasterboard on to timber frameworks of differing thicknesses, to be used for both wall and ceiling applications in interior and exterior applications. Screw directly into timber, no pre drilling req..
£8.81
£10.57 inc VAT
Brand: Rockwool
Model and Size: 1200x600mm - 3.60m2
Delivery Time: 3 - 5 weeks
30mm Rockwool Dual Density Slab is a rigid thermal insulation slab specifically created for external wall applications to go directly under render. It is made from volcanic rock, thus extremely durable and fire resistant. The higher density outer surface of the slab is to ..
Brand: Fermacell
Model and Size: 310ml
Delivery Time: In Stock 1-2 working days
310ml Fermacell Greenline JointStick is a ready mixed adhesive to achieve a strong glued joint between square edge Fermacell Gypsum Fibreboards. It has a special applicator nozzle provides the correct amount needed, right into the middle of the joint. Fermacell Green line Jointstick provides a ..
£13.04
£15.65 inc VAT
Brand: Various
Model and Size: 4.2x13mm - for thicker gauge steel
Delivery Time: 1 - 2 days
4.2x13mm Wafer Head Screw with Drill Point for fixing plasterboard on to thicker gauge steel frameworks.INSTALLATIONThe screws are installed flush so that the screw heads are level with the plane of the board, Screw spacing 250mm, or as specified by the panel manufacturer, ..
Brand: Various
Model and Size: 4.2x13mm - for thinner gauge steel
Delivery Time: 1 - 2 days
4.2x13mm Wafer Head Screw with Drill Point for fixing plasterboard on to thinner gauge steel frameworks.INSTALLATIONThe screws are installed flush so that the screw heads are level with the plane of the board, Screw spacing 250mm, or as specified by the panel manufacturer, ..
Brand: Isomass
Model and Size: 1200mm x 900mm - 1.08m2
Delivery Time: 1 - 2 days
40mm Isocheck Absorba Ceiling and Wall Panels are designed to absorb sound and reduce reverberation noise. The tiles comprise a fibreglass core with a white speckled laminated coating. They also have reinforced bevel edges contributing to allowing unique wall and ceiling designs. They can be emulsio..