All Products
CHOOSE MANUFACTURERS
Brand: MGC
Model and Size: MGC Mould Eradication Kit
Delivery Time: 2 - 3 working days
MGC Mould Eradication Kit contains everything required to deal with small outbreaks of black mould. The contents of this kit is sufficient to eradicate 10-12m of mould. Contents of this kit are approved under C.O.P.R. 1986 (as amended) by the Health and Safety Executive for both amateur and professi..
£66.41
£79.69 inc VAT
Brand: MGC
Model and Size: MGC RTL Pack
Delivery Time: 2 - 3 working days
The MGC RLT Pack is used for treating medium to severe mould contamination. The pack contains sufficient material to eradicate 45-50m of mould. RLT Bactdet 05 is used to kill and clean the mould off the surface of the walls and ceilings, RLT Halophen to penetrate into the substrate to kill the ..
£137.77
£165.32 inc VAT
Brand: MGC
Model and Size: 1 Litre
Delivery Time: 2 - 3 working days
1 Litre RLT Bactdet 05 - Sterilising solution for killing and removing mould specially used with Sempafloor.Dilute solution 1:4 with warm water. Wash down using a brush, cloth or sponge and change the solution when it becomes dirty. 5 litre cans are also available. Please inquire.Please note: this p..
£24.73
£29.68 inc VAT
Guide Price
Brand: MGC
Model and Size: Clearmould Spray - 235ml
Delivery Time: 2 - 3 working days
RLT Clearmould Spray is for treating mould and mildew on carpets, leather goods and furnishings. Just spray and clean with a cloth or sponge.Please note: this product is non-returnable once purchased. Terms and conditions apply. ..
Guide Price: £14.40
£17.28 inc VAT
Guide Price
Brand: Recticel
Model and Size: 600x1200 - 14.40m2
Delivery Time: 1-3 working days
25mm Recticel Powerdeck F is a durable, high strength PIR insulation board for built-up felt, mastic asphalt and single-ply membrane waterproofing systems. It has a PIR core faced on both sides with a gas tight alkali resistant facing - perforated mineral coated glass fibre tissue to both sides. It ..
Guide Price: £109.92
£131.90 inc VAT
Guide Price
Brand: Novia
Model and Size: 1.5m x 50m
Delivery Time: 1 - 2 days
Novia VC8 Reflective Air Leakage and Vapour Control Layer is a technologically advanced, air-tight vapour check membrane for use as an air leakage barrier and vapour control layer (AVCL) in insulated wall, roof and floor applications. This membrane prevents any surface condensation problems that may..
Guide Price: £70.67
£84.80 inc VAT
Guide Price
Brand: Etex Exteriors
Model and Size: 190x3600 - 0.68m2
Delivery Time: 5 - 7 days
Cedral Lap is an attractive, fibre cement cladding board which is an ideal low maintenance, rot free alternative to all types of traditional cladding, but with the visual appeal of natural timber. Cedral Lap is fitted in traditional lapped style. These boards are installed to the ventilated rainscre..
Guide Price: £20.89
£25.07 inc VAT
Brand: Millboard
Model and Size: 200mm x 2600mm - 0.52m2
Delivery Time: 3 - 5 days
16mm Millboard Envello Shadow Line+ Cladding Board - Antique Oak is a remarkable exterior solution that that replicates the look and feel of real wood. Whether you’re transforming a home or creating a commercial space, Envello Shadow Line+ Cladding combines aesthetics and performance for a remarkabl..
Brand: Millboard
Model and Size: 146mm x 3600mm - 0.53m2
Delivery Time: 3 - 5 days
16mm Millboard Envello Reveal Board - Antique Oak is designed to cover the inside of reveals around windows and doors when using Millboard Shadow Line+ or Board & Batten+ Cladding ranges. These boards are installed with coloured head screws and come in matching cladding colours. They enhance the aes..
Brand: Millboard
Model and Size: 50mm x 50mm x 3050mm
Delivery Time: 3 - 5 days
Envello Shadow Line+ External Corner Profile - Antique Oak is a flexible polymer resin profile that measures 50x50x3050mm designed to finish off the external corners of a building when using Shadow Line boards. You can fix it in place using the perforated closure and 20mm screws. These corner profil..
Brand: Millboard
Model and Size: 38mm x 38mm x 3050mm
Delivery Time: 3 - 5 days
Envello Shadow Line+ Internal Corner Profile - Antique Oak is a flexible polymer resin profile that measures 38mm x 38mm x 3050mm designed to finish off the internal corners of a building when using Shadow Line boards, ensuring a seamless finish. You can fix it in place using the perforated closure ..
Brand: Millboard
Model and Size: 200mm x 3600mm - 0.72m2
Delivery Time: 3 - 5 days
18mm Millboard Envello Shadow Line+ Cladding Board - Antique Oak is a remarkable exterior solution that that replicates the look and feel of real wood. Whether you’re transforming a home or creating a commercial space, Envello Shadow Line+ Cladding combines aesthetics and performance for a remarkabl..
Brand: Millboard
Model and Size: 200mm x 3600mm - 0.72m2
Delivery Time: 3 - 5 days
26mm Millboard Envello Board & Batten Cladding Board - Golden Oak is a remarkable exterior solution that that replicates traditional timber batten-on-board cladding and the look and feel of real wood. Millboard Envello Board and Batten Cladding combines aesthetics and performance for a remarkable o..
Brand: Millboard
Model and Size: 50mm x 50mm x 3050mm
Delivery Time: 3 - 5 days
Millboard Envello Board and Batten Square Corner Profile - Antique Oak is a premium trim designed for modern cladding projects using Envello Board and Batten cladding to finish both internal and external corner connections, for both vertical and horizontal installations. These corner profiles w..
Brand: Millboard
Model and Size: 25mm x 10mm x 2500mm
Delivery Time: 3 - 5 days
Millboard Envello Cladding Horizontal Starter Trim - Aluminium J Profile is an aluminium J-shaped profile used to start the cladding at the bottom when it’s installed horizontally. These trims combine aesthetics and performance, providing a unique, durable, and modern outdoor experience suitable for..
Brand: Millboard
Model and Size: 25mm x 13mm x 2500mm
Delivery Time: 3 - 5 days
Millboard Envello Cladding Vertical Starter Trim - Aluminium L Profile is an aluminium L-shaped profile used to start the cladding at the bottom when the cladding is installed vertically. These trims combine aesthetics and performance, providing a unique, durable, and modern outdoor experience suita..
Brand: Millboard
Model and Size: 3.5 x 20mm - Box of 250
Delivery Time: 3 - 5 days
3.5 x 20mm Millboard Envello Cladding Stainless Steel Screws are used to fix Millboard’s corner profiles, starter trims, and perforated closures. They are not intended for fixing cladding boards into timber or composite battens. The screws have a self-cutting tip, a six-point Torx head, and are waxe..
Brand: Millboard
Model and Size: 25mm x 50mm x 2500mm
Delivery Time: 3 - 5 days
Millboard Envello Cladding Aluminium Perforated Closure Profiles are used to prevent insects and rodents from accessing the ventilated cavity behind the boards while still allowing for airflow. They are fixed at the bottom of the cladding with the starter trim, and used alone at the top. They a..
Brand: Millboard
Model and Size: 3.5 x 30mm - Box of 250
Delivery Time: 3 - 5 days
3.5 x 30mm Millboard Envello Cladding Stainless Steel Screws are used for fixing Millboard cladding boards onto battens through the tongue on the board. These screws are ideal for securing cladding boards into timber or composite battens, ensuring a secure installation.CHARACTERISTICSSelf-cutting ti..
Brand: Millboard
Model and Size: 3.5 x 40mm - Box of 100
Delivery Time: 3 - 5 days
3.5 x 40mm Millboard Envello Cladding Stainless Steel Colour Match Screws are designed to go through the face of Millboard Envello cladding boards when unable to screw through the tongue. These screws combine aesthetics and performance for a unique, durable, and modern outdoor experience suitable fo..
Brand: Millboard
Model and Size: 500ml tin
Delivery Time: 3 - 5 days
Millboard Touch-Up Paint is perfect for blending in cut ends is supplied in 500ml tins and in a range of colours to match your choice of Millboard cladding. Touch up coating is not recommended for use on the surface of the board. Available in 8 colours.How to UseEnsure the surface is clean, dry..
Brand: Millboard
Model and Size: 47mm x 16mm x 3600mm
Delivery Time: 3 - 5 days
47mm Millboard Envello Décor Curve Trim is a curved profile for unique design possibilities. Millboard’s Envello Décor range is the market’s first premium, purpose-made cladding trim designed to enhance outdoor living spaces. Available in lustrous Gold, sleek Carbon, and timeless Bronze, these metal..
Brand: Millboard
Model and Size: 47mm x 16mm x 3600mm
Delivery Time: 3 - 5 days
47mm Millboard Envello Décor Shutter Trim is a flat profile for unique design possibilities. Millboard’s Envello Décor range is the market’s first premium, purpose-made cladding trim designed to enhance outdoor living spaces. Available in lustrous Gold, sleek Carbon, and timeless Bronze, these metal..
Guide Price
Brand: Bison Building Systems
Model and Size: M4 - 100nos
Delivery Time: 2 - 5 working days
Bison Composite Batten Cladding Fixing Screws to be used hidden on the lap detail of the cladding plank to timber or light gauge steel.CHARACTERISTICS25mm long Diameter: 4mmCountersunk Pozi head..
Guide Price: £6.13
£7.36 inc VAT
Guide Price
Brand: Etex Exteriors
Model and Size: 186mm x 3600mm - 0.67m2
Delivery Time: 2 - 5 working days
Cedral Click is a flush fitting, fibre cement, tongue and groove cladding board that is an ideal low maintenance, rot free alternative to traditional timber cladding, but with the visual appeal of natural timber. Its Click Clip System makes installation quick and easy. Cedral Click is installed to t..
Guide Price: £29.78
£35.74 inc VAT
Guide Price
Brand: Bison Building Systems
Model and Size: 219mm x 2700mm - 0.54m2
Delivery Time: 2 - 5 working days
26mm Bison Composite Batten Cladding Plank is an elegant wood plastic composite cladding planks with a timber look that can be installed vertically or horizontally. It is available in two colours: Ash Grey or Oak, with a lifelike woodgrain timber finish. It is a low maintenance, UV stable and r..
Guide Price: £21.88
£26.26 inc VAT
Guide Price
Brand: Bison Building Systems
Model and Size: 140mm x 2500mm - 0.35m2
Delivery Time: 2 - 5 working days
12mm Bison Composite Batten Cladding Edge Board is an elegant wood plastic composite cladding edge plank with a timber look that can be used to finish and close a side. It is available in two colours: Ash Grey or Oak, with a lifelike woodgrain timber finish. Bison Composite Batten Cladding Edge..
Guide Price: £15.95
£19.14 inc VAT
Guide Price
Brand: Bison Building Systems
Model and Size: 56mm/51mm x 2500mm
Delivery Time: 2 - 5 working days
Bison Composite Batten Cladding L-Corner is an elegant wood plastic composite cladding corner board with a timber look that can be used to finish and close a corner. It is available in two colours: Ash Grey or Oak, with a lifelike woodgrain timber finish. Bison Composite Batten Cladding Edge Bo..
Guide Price: £9.51
£11.41 inc VAT
Guide Price
Brand: Bison Building Systems
Model and Size: 2000m
Delivery Time: 2 - 5 working days
Bison Composite Batten Cladding Steel Drip Trim is to be used above window and door reveals to carry water away from the building. It can also be used at the bottom of cladding to create drip edge. Available in Brown and grey. Powder coated.CHARACTERISTICSHidden Leg: 20mm,Kickout leg: 30m..
Guide Price: £14.93
£17.92 inc VAT
Guide Price
Brand: Bison Building Systems
Model and Size: M4 - 100nos
Delivery Time: 2 - 5 working days
Bison Composite Batten Cladding Colour Screws to be used on any visible batten clad fixings and for corners or edge boards. CHARACTERISTICS35mm long Diameter: 4mmColour: Brown or GreyCountersunk Pozi head..
Guide Price: £10.20
£12.24 inc VAT