Insulation Bonded to Other Material
Types of insulation core that can be bonded to rigid boards
- Polyisocyanurate Insulation (PIR),
- Phenolic Insulation,
- Extruded or Expanded Polystyrene,
- Rock wool
- Plywood
- Oriented Strand Board (OSB)
- Chipboard
- MDF
- Cement Based Board
- Calcium Silicate Board
- Gypsum Plasterboard
- Metal Sheets
Applications
- Wall insulation
- Soffit Insulation
- Ceiling insulation
- Floor insulation
- Flat roof insulation
- As building boards - Composite Insulation Panels (CIP) and Structural Insulated Boards (SIP)
A high performance rigid insulation board made from PIR core faced with composite kraft paper bonded to plasterboard, specially designed for internal walls dry lining and insulation, due to its closed cell composition and tight facings that provide not only thermal insulation but also high level of moisture resistance and a vapour control layer, a 3 in 1 solution.
.jpg)
- Kingspan Thermaroof,
- Celotex PL4000,
- Celotex GD5000,
- Xtratherm Plydeck,
- Recticel Plylok,
- Xtratherm Thermal Liner Mech Fix ( 9.5mm Plasterboard),
- Xtratherm Thermal Liner Mech Fix (12.5mm Plasterboard),
- Xtratherm Thermal Liner Dot and Dab (9.5mm plasterboard),
- Xtratherm Thermal Liner Dot and Dab (12.5mm plasterboard),
- Ecotherm Ecoliner,
- Ecotherm Eco-deck,
- Gyproc Thermaline,
- Gyproc Thermaline MR
Products available at Insulation Shop with Polystyrene insulation core bonded to rigid boards
- Knauf EPS Thermal Laminate,
- Knauf Polyfoam Linerboard,
- Cellecta Hexatherm XCPL Thermal Laminate,
- Cellecta Hexatherm XCHIP Thermal Laminate,
- Cellecta Hexatherm XMD Thermal Laminate,
- Cellecta Hexatherm XPLY Thermal Laminate,
- Gyproc Thermaline Basic,
- Gyproc Thermaline Plus
Phenolic insulation bonded board
A highly efficient rigid board bonded to phenolic foam insulation that offers vapour control and fire resistance. The phenolic core is manufactured without harmful agents such as CFC and HCFC, hence it is highly environmentally friendly. When the phonolic core is bonded to gypsum board, they become practically incombustible.
Products available at Insulation Shop with Polystyrene insulation core bonded to rigid boards
Composite Insulation Panels
They are used in external wall and roof cladding systems but also internally for building applications such as enclosures, compartment walls and cold stores. This board is usually known as sandwich panel and it comprises two metal facings factory bonded, one each side, to an insulating core to form a sandwich. Mineral fibre, PUR (polyurethane) foam, PIR (polyisocyanurate) foam, Polystyrene and Phenolic foam are used as the thermal insulant. The type of insulating core used is important because it may have a direct bearing on the performance of a panel in a fire. They are used in external building envelope in walls and roofs, while internally in factories, enclosures, garages and cold stores.
Structural Insulated Panels
Structural insulated panels (SIPs) are the main element of a high performance construction system for residential and commercial construction. A SIP consists of an insulating foam core sandwiched between two structural facings. Oriented strand board (OSB) is used widely to create SIPs. They are made in factory conditions, the insulating core is bonded to the OSB sheets at high pressure. Together as the panel has higher strength than the OSB sheet and the insulating core. SIP construction is much less labour intensive than traditional wood frame construction. Extruded and expanded polystyrene is mostly used as the insulating core.
CHOOSE MANUFACTURERS
