Helical Bar Grout HG3 - 3 Litres
Helical Bar Grout HG3 - 3 Litres
- Product Code: A1-3573
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 3L
Our ratings on 27-01-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Helical Bar Grout HG3 - 3 Litres
Volume: 3litres
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection into masonry voids. Helical Bar Grout is suitable for bonding metal components into substrates, such as concrete, brick, blocks or stone. Due to its thixotropic ability, the Helical Bar Grout would flow sufficiently to form a uniform layer, then resist further flow, thereby preventing sagging on a vertical surface. This way, the grout would completely fills all voids into which it is injected and develops its compressive strength rapidly.
- Helical Grout is packed in tubs containing individually packed dry powder and liquid.
- 3L tub would cover 10m.
INSTALLATION
- It is important to make the correct size of hole to ensure a good bond.
- A minimum clearance of 2mm all round should be allowed, e.g 10mm hole for 6mm helical bar,
- A greater clearance being required with more absorbent substrate.
- The hole should be vacuumed and flushed out with clean water.
- Mix the Helical Grout by adding half of the powder to all of the liquid in the tub provided.
- Mix until blended.
- Add the remaining powder and mix thoroughly, preferably using a powered mixing paddle for a minimum of two minutes.
- Pour the mixture into the cartridge of the pointing gun and inject into the hole or slot in a continuous operation.
Brand: Teco
Model and Size: 13mm - 3m
Delivery Time: 1 - 2 days
13mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£55.22
£66.26 inc VAT
Brand: Teco
Model and Size: 16mm - 3m
Delivery Time: 1 - 2 days
16mm Stainless Steel Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length.Installation U..
Brand: Teco
Model and Size: 3L
Delivery Time: 1 - 2 days
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection into masonry voids. Helical Bar Grout is suitable for bonding metal components into substrates, such as concrete, brick, blocks or stone. Due to its thixotropic ab..
Brand: Teco
Model and Size: 6mm x 1m - Kit
Delivery Time: 1 - 2 days
6mm x 1m Stainless Steel Helical Bar is used for repairing cracks and reinforcing masonry in both new and existing masonry structures. The helical bar with its deformed fins makes the bonding far superior to standard reinforcing materials. The Masonry Crack Stitching System is fully certified.The Ma..
£105.25
£126.30 inc VAT
Guide Price
Brand: Teco
Model and Size: 135mm - Free Delivery
Delivery Time: 1 - 2 days
135mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs&..
Guide Price: £30.70
£36.84 inc VAT