EWI-330 Mineral Acrylic Primer - 21kg

EWI-330 Mineral Acrylic Primer is a deep-penetrating primer used to prepare substrate surfaces to create an artificial key prior to applying mineral, acrylic and mosaic renders. It is a water-based primer containing acrylic polymers, quartz aggregate, pigments and enhancers and reduces the absorptive capacity of the substrates and aids the adhesion of the render. EWI-330 doesn't compromise breathability of the surface and helps to give a long lasting finish.

• Ease of Application,
• Can be used on a variety of substrates,
• Waterproof,
• Frost-proof,
• Vapour-permeable,
• Increases the adhesion of paints and mortars,
• Facilitates the application of paints and mortars,
• Usage: approx. 0.2-0.3 kg/m2 (depending on substrate structure and absorbency.
  

• All substrates must be stable, even and clean.
• Remove all unstable (dull sounding) plaster from the substrate.
• All uneven surfaces should be levelled out using the EWI-260 Levelling Mortar.
• Mix the contents thoroughly before use.
• Do not dilute with water or any other product.
• Apply using a brush or roller.
• Highly absorptive and sandy substrates should be covered with EWI-301 Water Based Primer and allowed to dry for at least 12 -24 hours prior to priming with EWI-330.
  
• The primed surface is allowed to dry for 24 hours.
  
• Work must not be carried out during rain or snow, in strong winds and in direct sunlight without special protection to limit exposure to weather conditions.
  
• Recently rendered coats must be protected against rain, frost and over-rapid drying.

• European Technical Approval No. ETA-07/0192