EWI-060 Mineral Render - 25kg bag

EWI-060 Mineral Render is a breathable and quick-drying, making it ideal for installation in colder, more humid conditions. It is based on Portland cement, texturing aggregate, mineral fillers and hydrated lime and is perfect for external plastering work. EWI-060 mineral render is highly breathable, adhesive, elastic and durable, and once the mass is set firm and hard, it has excellent water and frost resistance, and offers colour stability and is resistant to weather conditions and other contaminants. It can be applied by hand or mechanically sprayed. It can be painted over with silicone paints.

EWI-060 Mineral render should be installed on top of the reinforced basecoat layer to ensure the system is durable and will withstand cracking during any movements within the underlying substrate. This mineral render can be used as a render only finish or on either EPS or mineral wool.

Available in 1mm, 1.5mm, 2mm & 3mm grain size.

• Ease of Application,
• Dry-mix render with mineral binding agents, mineral fillers, modifying additives,
  
• Good adhesion,
• Water-resistant,
  
• Frost resistant.

• The basecoat layer should be primed with EWI-330 Mineral/Acrylic Primer using a brush, a roller or a spray machine.
• Pour the contents of the bag into 6.5 litres of clean water, then mix thoroughly to produce a consistent texture. Leave for 5 minutes and then mix again.
• Trowel the render keeping the optimal thickness of the render equal to the grain size.
• Rub up the surface of the render using circular motions with a plastic render float to achieve an even textured finish.
• Allow the render to dry completely before applying Silicone paint. The average drying time for Acrylic render is 12-48 hours depending on weather conditions.
• Work must be protected from rain, snow, strong winds and direct sunlight.
  

• European Technical Approval No. ETA-07/0192