Erfurt MAV Wallrock Power Adhesive - 10kg

Erfurt MAV Wallrock Power Adhesive is high performance extra strength ready-to-use wallcovering adhesive suitable for hanging all types of wallpapers. This smooth, easy to use adhesive has excellent wet tack properties and slides easily for perfect hanging and pattern matching. It is readymade so no mixing is required.

Typical consumption: 1kg per 5m²

CHARACTERISTICS

• Suitable for most types of wallpaper.
• High-performance aqueous paste based on a blend of natural starches.
• Thick, smooth, and easy-to-use formula:
  • Can be rolled or brushed straight from the tub.
• Low splatter, high wet tack, and easy to slide and position.
• Added PVA for increased strength and resistance to moisture and humidity.
• Contains an inhibitor to prevent mould, yeast, and fungal growth.

INSTALLATION

• Surfaces should be clean, dry, sound and free from loose paint, plaster, dust and mould.
• Drywall and other absorbent surfaces must be sized and left to dry completely.
• Sizing should be completed at least 4 hours prior to pasting and hanging.
• For Paste-The-Wall application:
  • Refer to the wallpaper manufacturer's label for specific instructions.
  • Ensure the wallpaper is suitable for Paste-The-Wall application.
• For best results, use a roller to apply Wallrock Power Adhesive generously and evenly to the wall:
  • Ensure complete coverage from floor to ceiling.
• A coverage rate of 1kg per 5m² is suitable for most products.
• Paste up to two widths of wallpaper at once to reduce decoration time.
  • Apply the paper to the pasted wall:
• Position the wallpaper sheet by sliding it into place.
• Smooth into the final position under pressure using a squeegee, wallpaper brush, or damp sponge.
• Complete hanging and trimming as normal.