Erfurt MAV Wallrock Fireliner (Class 0) - Ultimate Fire Resistant Lining Paper - 550mm x 10m roll

Erfurt MAV Wallrock Fireliner is the ultimate fire resistant lining paper that will also help protect vulnerable surfaces from fire. It is a 'Class Zero' fire rated liner (tested to BS476) and contains fire retardant. The risk of fire is further limited even when the paper is peeling or has been applied over normally flammable surfaces. Wallrock Fireliner is a strong, durable and easy to hang professional quality wall lining paper suitable for a whole variety of problematic walls. Wallrock Fireliner can be used on problematic walls and ceilings, adding fire protection to cracked and damaged surfaces. The walls can be covered quickly and easily, and it will also help to reinforce your wall surface. It can be applied on walls and ceilings.

Available in 2 roll lengths, please inquire

• single length: 10m x 55cm coverage: 5.5m² approx
• double length: 20m x 55cm coverage: 11m² approx

CHARACTERISTICS

• Manufactured from well managed FSC sources
• Contains textile fibres for added strength and durability
• Excellent strength and durability
• Disguises imperfections
• Reinforces walls and ceilings
• Tough and durable
• Allows your walls to breathe
• An excellent base surface
• Easy to use
• PVC and fibreglass free

INSTALLATION

• Cut all lengths required, allowing extra for trimming at each end, or simply hang directly from the roll onto a pre-pasted wall or ceiling.
• Apply the inner surface to the wall.
  • Please note that Wallrock Fibreliner Ultra can also be hung horizontally, which is especially useful if you intend to overhang with a decorative wallpaper.
• Mark a guideline with a pencil for the first length, using a plumb line as a guide for vertical drops or a spirit level for horizontal application.
• If applying the adhesive directly to the wall or ceiling, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length.
• If pasting the material (on either side), make sure all edges are covered.
• With both methods, hang Wallrock Fibreliner Ultra immediately—no soaking is required.
• Apply the first length along the guideline and smooth it out with a wallpaper brush, then trim the ends.
• Butt join all subsequent lengths, being careful not to overlap the edges.
• Allow Wallrock to dry thoroughly before decorating with emulsion paint or overhanging with another wall covering (normally, 24 hours is sufficient).
• Wallrock Fibreliner is also ‘dry strippable’ in many applications.