Erfurt MAV Wallrock Fibreliner Smooth 150 - Professional Quality Wall Lining Paper - 550mm x 10m roll

Erfurt MAV Wallrock Fibreliner Smooth 150 is a strong, durable and easy to hang professional quality wall lining paper suitable for a whole variety of problematic walls. Cracked and damaged walls can be covered quickly and easily and it will add strength to help reinforce your wall surface. It will enable old and tired walls to be smooth once more. Wallrock Fibreliner 150 has a 'natural' uncoated finish. It is an excellent surface for paint or paper. It can be applied on walls and ceilings. Wallrock Fibreliner offers two surface finishes. The outer surface of the roll offers an improved finish for either painting or over hanging with wallpaper. It is recommended that the inner surface of the roll is applied to the wall. Wallrock Fibreliner Smooth 150 offers smoother finish resulting in lower paint consumption and a beautifully modern overall look.

Available in 4 roll lengths, please inquire

• single length: 10m x 55cm coverage: 5.5m² approx
• double length: 20m x 55cm coverage: 11m² approx
• double length: 20m x 75cm coverage: 15m² approx
• double length: 20m x 100cm coverage: 20m² approx

CHARACTERISTICS

• Manufactured from well managed FSC sources
• Contains textile fibres for added strength and durability
• Perfect surface for paint or decorative wallpaper
• Reinforces and smooths damaged walls and ceilings
• Excellent strength and durability
• Disguises imperfections
• Reinforces walls and ceilings
• Tough and durable
• Allows your walls to breathe
• An excellent base surface
• Easy to use
• PVC and fibreglass free
• Fire rated B-s1,d0

INSTALLATION

• Cut all lengths required, allowing extra for trimming at each end, or simply hang directly from the roll onto a pre-pasted wall or ceiling.
• Apply the inner surface to the wall.
  • Please note that Wallrock Fibreliner can also be hung horizontally, which is especially useful if you intend to overhang with a decorative wallpaper.
• Mark a guideline with a pencil for the first length, using a plumb line as a guide for vertical drops or a spirit level for horizontal application.
• If applying the adhesive directly to the wall or ceiling, apply enough to hang one or two lengths at a time, ensuring the paste exceeds the width of the second length.
• If pasting the material (on either side), make sure all edges are covered.
• With both methods, hang Wallrock Fibreliner immediately—no soaking is required.
• Apply the first length along the guideline and smooth it out with a wallpaper brush, then trim the ends.
• Butt join all subsequent lengths, being careful not to overlap the edges.
• Allow Wallrock to dry thoroughly before decorating with emulsion paint or overhanging with another wall covering (normally, 24 hours is sufficient).
• Wallrock Fibreliner is also ‘dry strippable’ in many applications.