Ceresit ZU WHITE Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Ceresit ZU WHITE Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Price: £21.87 (£26.24 inc VAT)
Price per m2: £4.37/m2 (£5.25 inc VAT)
- Product Code: A1-2732
- Delivery Time: In Stock 1-2 working days
- Brand: Ceresit
- Model and Size: ZU White - 25kg
- Weight: 25.00kg
Our ratings on 28-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Ceresit ZU White Polystyrene and Reinforced Mesh Adhesive - Base Coat Render
Weight: 25kg
Ceresit ZU White Polystyrene and Reinforced Mesh Adhesive is a cement-based, polymer-modified adhesive specifically designed for fixing white or graphite expanded polystyrene (EPS) insulation boards to exterior walls. The EPS boards should meet the requirements of external thermal insulation composite systems (ETICS) according to British Standard EN 13163. Ceresit ZU provides an excellent bond between the insulation and the substrate, whether that is concrete, brickwork, or existing renders. It is also used to embed the reinforcing mesh layer over the insulation, creating a base coat render system. The adhesive is flexible enough to accommodate minor movements in the substrate.
CHARACTERISTICS
- White version
- Cement-based, polymer-modified adhesive
- Designed for fixing white or graphite expanded polystyrene (EPS) insulation boards
- EPS boards should meet requirements of EN 13163 for ETICS
- Provides excellent bond strength between insulation and substrate
- Suitable for concrete, brickwork, and existing render substrates
- Used to embed reinforcing mesh, creating a base coat render system
- Flexible to accommodate minor substrate movements
- Easy to apply
APPLICATIONS
- External walls
Application and installation of an external wall insulation system
Fixing polystyrene boards.
- Adhesive should be applied with a trowel around the perimeter of the board - band of 3-4cm wide and several blobs in the centre.
- Place the board to the wall and press it down with a long float. Properly applied mortar after pressing the board to the wall should cover min. 40% of its area.
- The boards should be fixed closely to each other in one plane, with the horizontal joints in different levels.
Installing the reinforced mesh.
- Add the adhesive with a 10 or 12mm notched trowel on the surface polystyrene boards.
- Press the mesh on the fresh mortar until it is no longer visible.
- Thin coat render can be made after approx. 24 hours from the application of the reinforcement layer.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.
Ceresit-ZU-datasheet.pdf
Brand: Ceresit
Model and Size: CT280
Delivery Time: In Stock 1-2 working days
Ceresit CT 280 Winter is a high quality accelerating additive for ETICS and wet renders drying under low temperatures in late autumn and early spring times, especially when the temperature fall below zero in the nights. This additive can be used for cement based mineral adhesive mortars - CT 83, CT ..
£6.23
£7.48 inc VAT
Brand: Ceresit
Model and Size: CR65
Delivery Time: In Stock 1-2 working days
Ceresit CR65 Waterproofing Slurry is a cement-based coating designed for waterproofing surfaces like concrete and masonry. It creates a protective barrier against water penetration, ideal for both indoor and outdoor use, including basements, foundations, and retaining walls. CR65 is easy to apply wi..
£29.98
£35.98 inc VAT
Brand: Ceresit
Model and Size: FG-038
Delivery Time: In Stock 1-2 working days
The expanding foam gun is a tool which gives a much greater degree of control over the product you are using which not only increases the accuracy of the application but cuts down on un-wanted and unnecessary wastage. Foam gun is manufactured to the highest quality controls and strong construction t..
£15.02
£18.02 inc VAT
Brand: Ceresit
Model and Size: ZU White - 25kg
Delivery Time: In Stock 1-2 working days
Ceresit ZU White Polystyrene and Reinforced Mesh Adhesive is a cement-based, polymer-modified adhesive specifically designed for fixing white or graphite expanded polystyrene (EPS) insulation boards to exterior walls. The EPS boards should meet the requirements of external thermal insulation composi..
£21.87
£26.24 inc VAT
Brand: Ceresit
Model and Size: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-8 is an universal Silicone Sealant CS 8 is used to fill gaps between building materials and finishing elements. It has excellent adhesion to ceramic tiles, wood, enamel, porcelain and painted surfaces. It is also used for sealing windows, doors, glass blocks, glass blocks, bathtubs, showe..
Brand: Ceresit
Model and Size: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-38 is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1,200 ° C, and for short periods even up to +1,500 ° C. It has very good adhesion to surfaces such as: concrete, cement mortars and plasters, bricks (also refractory),..