Ceresit ZU Insulation and Mesh Adhesive (Base Coat Render) - Pallet of 48 bags
Ceresit ZU Insulation and Mesh Adhesive (Base Coat Render) - Pallet of 48 bags
Price: £624.00 (£748.80 inc VAT)
Price per m2: £2.60/m2 (£3.12 inc VAT)
- Product Code: A1-2736
- Delivery Time: 1 - 2 days
- Brand: Ceresit
- Model and Size: Pallet of 48 bags
- Weight: 999.99kg
Our ratings on 20-12-2024:
4.7 out of 5 - Excellent
4.8 out of 5
Ceresit ZU Insulation and Mesh Adhesive (Base Coat Render) - Pallet of 48 bags
Pallet Coverage: 240.00m2
Weight: 999.99kg
Ceresit ZU Insulation and Mesh Adhesive is a cement-based, polymer-modified adhesive specifically designed for fixing white or graphite expanded polystyrene (EPS) insulation boards to exterior walls. The EPS boards should meet the requirements of external thermal insulation composite systems (ETICS) according to British Standard EN 13163. Ceresit ZU provides an excellent bond between the insulation and the substrate, whether that is concrete, brickwork, or existing renders. It is also used to embed the reinforcing mesh layer over the insulation, creating a base coat render system. The adhesive is flexible enough to accommodate minor movements in the substrate.
CHARACTERISTICS
- Cement-based, polymer-modified adhesive
- Designed for fixing white or graphite expanded polystyrene (EPS) insulation boards
- EPS boards should meet requirements of EN 13163 for ETICS
- Provides excellent bond strength between insulation and substrate
- Suitable for concrete, brickwork, and existing render substrates
- Used to embed reinforcing mesh, creating a base coat render system
- Flexible to accommodate minor substrate movements
- Easy to apply
APPLICATIONS
- External walls
Application and installation of an external wall insulation system
Fixing polystyrene boards.
- Adhesive should be applied with a trowel around the perimeter of the board - band of 3-4cm wide and several blobs in the centre.
- Place the board to the wall and press it down with a long float. Properly applied mortar after pressing the board to the wall should cover min. 40% of its area.
- The boards should be fixed closely to each other in one plane, with the horizontal joints in different levels.
Installing the reinforced mesh.
- Add the adhesive with a 10 or 12 mm notched trowel on the surface polystyrene boards.
- Press the mesh on the fresh mortar until it is no longer visible.
- Thin coat render can be made after approx. 24 hours from the application of the reinforcement layer.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.
Ceresit-ZU-datasheet.pdf
Brand: Ceresit
Model and Size: 280ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-38 is a one-component, high-temperature sealant resistant to direct contact with fire and temperature fluctuations up to +1,200 ° C, and for short periods even up to +1,500 ° C. It has very good adhesion to surfaces such as: concrete, cement mortars and plasters, bricks (also refractory),..
Brand: Ceresit
Model and Size: 14cm x 28cm - free delivery
Delivery Time: 1 - 2 days
Plastic trowels are used in finishing of the insulated textured renders - silicone, acrylic or silicate.
CHARACTERISTICS:
plastic handle
lightweight and sturdy
size: 14cm/28cm..
£7.51
£9.01 inc VAT
Brand: Ceresit
Model and Size: CT174 - 25kg 2mm
Delivery Time: 5 - 7 days
2mm grain Ceresit CT174 Silicate-Silicone Render is a high-performance, exterior thin-layer decorative render. It is particularly recommended for use as a facade render within Ceresit ETICS (External Thermal Insulation Composite Systems), where it can be applied over EPS (Expanded Polystyrene) board..
Guide Price
Brand: Ceresit
Model and Size: CT74 - 25kg
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT79 Impactum Elastomeric Render is a high-performance, flexible, and breathable render that provides exceptional adhesion and durability for a wide range of substrates. This render is specifically designed for use in areas with high movement and vibration, making it an ideal sol..
Guide Price: £175.00
£210.00 inc VAT
Brand: Ceresit
Model and Size: 300ml
Delivery Time: In Stock 1-2 working days
Ceresit CS-11 Acrylic Sealant is used to fill joints, cracks and cavities in all kinds of walls, plaster and wood. It has high adhesion to any compact, porous and absorbent materials such as: aerated concrete, gypsum, sandstone, chipboards and plasterboards, and materials such as paint coatings, cer..
Brand: Ceresit
Model and Size: CT174 - 25kg
Delivery Time: 5 - 7 days
1.5mm grain Ceresit CT174 Silicate-Silicone Render is a high-performance, exterior thin-layer decorative render. It is particularly recommended for use as a facade render within Ceresit ETICS (External Thermal Insulation Composite Systems), where it can be applied over EPS (Expanded Polystyrene) boa..
£58.00
£69.60 inc VAT