Ceresit CR166 Two-component Flexible Waterproofing Slurry - Bucket (12kg powder and 2L liquid)
Ceresit CR166 Two-component Flexible Waterproofing Slurry - Bucket (12kg powder and 2L liquid)
- Product Code: A1-5123
- Delivery Time: In Stock 1-2 working days
- Brand: Ceresit
- Model and Size: CR166 - Bucket
- Weight: 14.00kg
Our ratings on 02-07-2024:
4.7 out of 5 - Excellent
4.8 out of 5
Ceresit CR166 Two-component Flexible Waterproofing Slurry - Bucket
Weight: 14kg
Fire Rating (Reaction to Fire): E
Application Temperature: +5 to +30 °C
Ceresit CR166 is a two-component flexible slurry, strengthened with fibres and designed for waterproofing and damp-proofing on on walls, floors and ceilings. It can be used on deformable and non-deformable mineral substrates. Its flexibility allows it to bridge ≥ 0,75 mm wide cracks – even in cold conditions. Ceresit CR166 waterproofing coating delays the carbonation process and provides effective anti-corrosion protection for concrete/reinforced concrete land and water structures.
- Component A: 2 x 6kg powder
- Component B: 2 x 1L liquid
CHARACTERISTICS
- Highly waterproof,
- Reinforced with fibres,
- Flexible,
- Fast setting,
- Crack bridging ability even at low temperatures,
- Weather and frost resistant,
- UV resistant,
- Can be applied by brush, roller, trowel or mechanical spray,
- Protects reinforced & standard concrete structures.
APPLICATION
- On balconies and terraces,
- On permanent and temporary wet rooms,
- On swimming pool walls and floors,
- On basement walls, foundations and other concrete structures embedded in the ground,
- On water tanks containing drinking water,
- On municipal sewage treatment plants and septic tanks,
- For waterproofing and damp-proofing on deformable and non-deformable mineral substrates.
- Compatible with tape.
USAGE
- Check and clean the substrate and prewet mineral substrate
- Prepare the components: the powder – 24 kg (component A) and liquid 8 l (component B),
- Pour comp. B to the bucket (add 25% of water for 1st contact layer),
- Add comp. A in required ratio,
- Mix until homogenous, let the slurry mature for 5 min. and mix shortly,
- Apply 1st layer of CR 166 with brush,
- Fix the tape (e.g. CL 152) into fresh 1st layer in places of expansion joints, inner corners or joints between different material types,
- Adjust consistency to relevant application tool,
- Apply subsequent layer of CR 166 with trowel or roller,
- When covering a large areas, it is possible to apply CR 166 with a spray gun,
- As a final step, smooth the surface with a trowel,
- Ready for tiles fixing after min 12 h. Colour change of the slurry indicates drying.
Once purchased this product is non-returnable.
Please note that we can supply this product cheaper if you buy it with the whole external wall system from us. Contact us for more details.