ARC Wired Tile Batten Barrier - Fire Barrier Between Roof Covering And Underside Of Tiles - Pack of 5

ARC Wired Tile Batten Barrier - Fire Barrier Between Roof Covering And Underside Of Tiles - Pack of 5
- Product Code: A1-5596
- Delivery Time: 2 - 3 working days
- Brand: ARC Building Solutions
- Model and Size: WTBR1250/200/50
Our ratings on 02-04-2025:

4.7 out of 5 - Excellent


4.8 out of 5
ARC Wired Tile Batten Barrier - Fire Barrier Between Roof Covering And Underside Of Tiles - Pack of 5
Length: 1250mm
Width: 200mm
Thickness: 50mm
Pack Quantity: 5
ARC Wired Tile Batten Barrier is a non-combustible wire reinforced rockfibre mineral wool fire barrier that stops fire between roof covering and underside of tiles. It is used as a fire, thermal and acoustic break at the party wall between the roof tiles and roof membrane. In conjunction with the ARC Party Wall System would create a complete fire break at the separating wall between two dwellings. Correct installation will achieve compliance with NHBC Standards 7.2.16.
CHARACTERISTICS- Easy to install,
- Create a complete party wall fire stopping solution,
- Provides fire stopping between roof tiles and roof membrane,
- Complies with NHBC 2017 7.2.16.
- Position the ARC Wired Tile Batten Barrier at the party wall line above the roof covering and before the tile battens are fitted.
- Use a knife to cut through the insulation of the ARC Wired Tile Batten Barrier in line with the leading (top) edge of the tile batten.
- Do not cut through the wire mesh.
- Care must be taken to not damage the roof covering underneath.
- Work the tile batten into the cut in the insulation.
- The lower edge of the tile batten should be covered by insulation.
- This ensures that the gap between the batten and underside of the roof tile, once fitted, are filled.
- Check the insulation has recovered to a height that will fill to the back of the roof tile when fitted.
- Work the material so that no gaps will remain once the tiles have been fitted.
- ARC Wired Tile Batten Barrier is manufactured using rockfibre mineral wool which achieves a fire classification of Euroclass A1 as defined in BS EN 13501-1, and conforms to BS EN 13162 and EN16001 Energy Management Systems.
Brand: ARC Building Solutions
Model and Size: OSCB25 - 75mm x 100mm x 1200mm
Delivery Time: 2 - 3 working days
100mm wide ARC OSCB25 is a non-combustible rockfibre mineral wool cavity barrier for installation where ventilation is required in service use. It has a 4mm thick reactive intumescent layer, which will rapidly expand when exposed to heat in a fire event, closing off the air gap and preventing v..
Brand: ARC Building Solutions
Model and Size: TBTF100/100
Delivery Time: 2 - 3 working days
ARC T-Barrier Timber Frame for 100mm Masonry Party Wall Cavity is a non-combustible rockfibre mineral wool cavity fire barrier that enables the closing of an external cavity at timber frame party wall junctions receiving up to one hour fire integrity. ARC T-Barrier can be installed as the ..
Brand: ARC Building Solutions
Model and Size: CSS110
Delivery Time: 2 - 3 working days
120mm x 120mm x 1200mm ARC Cavity Stop Sock for 110mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ex..
Brand: ARC Building Solutions
Model and Size: CSS85
Delivery Time: 2 - 3 working days
105mm x 100mm x 1200mm ARC Cavity Stop Sock for 85mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ext..
Brand: ARC Building Solutions
Model and Size: CSS160
Delivery Time: 2 - 3 working days
170mm x 150mm x 1200mm ARC Cavity Stop Sock for 160mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ex..
Brand: ARC Building Solutions
Model and Size: CSS115
Delivery Time: 2 - 3 working days
130mm x 120mm x 1200mm ARC Cavity Stop Sock for 115mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ex..