ARC Cavity Stop Sock for 200mm Cavity - Fire Barrier 210mm x 150mm x 1200mm - Pack of 8
ARC Cavity Stop Sock for 200mm Cavity - Fire Barrier 210mm x 150mm x 1200mm - Pack of 8
- Product Code: A1-6026
- Delivery Time: 2 - 3 working days
- Brand: ARC Building Solutions
- Model and Size: CSS200
Our ratings on 27-02-2025:
4.7 out of 5 - Excellent
4.8 out of 5
ARC Cavity Stop Sock for 200mm Cavity - Fire Barrier 210mm x 150mm x 1200mm - Pack of 8
Length: 1200mm
Width: 210mm
Thickness: 150mm
Pack Quantity: 8
Fire Protection (Resistance to Fire): 240minutes
Cavity width: 200mm
Sleeve Colour: Red
210mm x 150mm x 1200mm ARC Cavity Stop Sock for 200mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the external wall cavity, in line with a separating wall or floor as specified in Approved Document B, and for closing the cavity at eaves level. ARC Cavity Stop Sock is simply compression fitted as the masonry work progresses. No mechanical fixing is required as the compression fit would hold the barrier in place, as the relevant Cavity Stop Sock is wider than the given cavity.
Note: The cavity width must be accurate and the cavity insulation should be cut back where the barrier will be located. Do not remove the cover. All corners and joints must be tightly butt jointed. Cavity Stop Sock barriers should not be bent around corners. Excess polythene should be removed, so Cavity Stop Sock can be tightly butt jointed.
- Up to 4 hours fire integrity,
- Can be installed horizontally and vertically,
- Easily installed with compression fit,
- No mechanical fix is required,
- Specified in terraced, semi-detached, apartments and major projects,
- Meets requirements of Robust Detail Part E and Approved Document B.
- The ARC Cavity Stop Sock must fully fill the cavity from external brick to internal block.
- Any cavity insulation must be cut back at the location of the barrier.
- Care must be taken to ensure that the built cavity width is accurate.
- Use appropriate ARC Cavity Stop Sock for the given cavity width.
- At the end of a run, or at a corner, lengths of barrier should be cut to the required length, and then tightly butt jointed ensuring no gaps remain.
- Build up the internal masonry work first.
- Then progress several courses of brickwork, before installing the barrier.
- The brickwork can continue, building the barrier in.
- Care must be taken to ensure the correct compression fit is achieved.
- Build the brickwork up to the level the barrier will be installed, ensuring the width of the cavity is correct.
- Allow the brickwork to set, before push fitting the barrier in to place and under the correct compression.
Arc-cavity-stop-sock-datasheet.pdf
Brand: ARC Building Solutions
Model and Size: for 100mm Cavity - 115mm x 500mm x 500mm
Delivery Time: 2 - 3 working days
ARC TCB Square is a faster and easier to install cavity barrier around service penetrations in external timber frame walls of low rise houses. It exceeds the Building Regulation part B fire safety norm EI30/15. ARC TCB Square provides a more robust solution, compared with either boxing in using cut ..
Brand: ARC Building Solutions
Model and Size: CSS75
Delivery Time: 2 - 3 working days
90mm x 75mm x 1200mm ARC Cavity Stop Sock for 75mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the exter..
Brand: ARC Building Solutions
Model and Size: CSS145
Delivery Time: 2 - 3 working days
155mm x 120mm x 1200mm ARC Cavity Stop Sock for 145mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ex..
Brand: ARC Building Solutions
Model and Size: CSS125
Delivery Time: 2 - 3 working days
135mm x 120mm x 1200mm ARC Cavity Stop Sock for 125mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ex..
Brand: ARC Building Solutions
Model and Size: CSS95
Delivery Time: 2 - 3 working days
115mm x 100mm x 1200mm ARC Cavity Stop Sock for 95mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ext..
Brand: ARC Building Solutions
Model and Size: CSS190
Delivery Time: 2 - 3 working days
200mm x 150mm x 1200mm ARC Cavity Stop Sock for 190mm Cavity is a non-combustible rockfibre mineral wool cavity barrier that restricts the spread of smoke and flames within the cavity of external and internal party masonry walls. It is ideally suited for providing a cavity fire barrier within the ex..