Ancon CFS180 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Ancon CFS180 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
- Product Code: A1-5564
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: CFS180
Our ratings on 23-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Ancon CFS180 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Length: 180mm
Pack Quantity: 100
Insulation Thickness: 96-125mmmm
Ancon CFS180 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the channel holes as a guide, mark the precise position of the pilot holes. Remove channel and push an Ancon Compression Sleeve through the insulation at each fixing location. Screw in the Ancon 25/14 channel into place. Insulation thickness: 96-125mm.
BENEFITS
- Quick installation,
- Avoids compression of insulation,
- Improved thermal bridging.
Note: Channels and Ties are bought separately
Ancon 25-14 Restraint System.pdf
Brand: Ancon
Model and Size: Teplo-BF-CT-25/150
Delivery Time: 2 - 5 working days
Ancon Teplo-BF-CT-25/150 Channel Wall Tie made of basalt fibres set in a resin matrix to provide a low thermal conductivity wall tie for 85-109mm open cavity for Ancon 25/14 channel to be fixed to an outer leaf of brickwork. The thermal efficiency these ties are excluded from U-value calculations to..
Brand: Ancon
Model and Size: 360mm
Delivery Time: 1-3 working days
360mm Ancon Teplo-BFR Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFR Wall Tie is a 7mm ..
Brand: Ancon
Model and Size: 250mm
Delivery Time: 2 - 3 working days
250mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£56.19
£67.43 inc VAT
Brand: Ancon
Model and Size: 515mm
Delivery Time: 2 - 3 working days
515mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Resin/Resin Wall Tie is a masonry remedial wall tie designed as a remedial tie for a separating wall. This RR Type A wall tie will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.CHARACTERIS..
Brand: Ancon
Model and Size: 230mm - BFL-7
Delivery Time: 1-3 working days
230mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..