Ancon CFS115 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Ancon CFS115 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
- Product Code: A1-5560
- Delivery Time: 2 - 5 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: CFS115
Our ratings on 02-10-2025:
4.8 out of 5
Ancon CFS115 Concrete Fixing Screws - Fixings for Ancon 25/14 Restraint System to Concrete Wall - bag of 100
Length: 115mm
Pack Quantity: 100
Insulation Thickness: 46-55mmmm
Ancon CFS115 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used. Using the channel holes as a guide, mark the precise position of the pilot holes. Remove channel and push an Ancon Compression Sleeve through the insulation at each fixing location. Screw in the Ancon 25/14 channel into place. Insulation thickness: 46-55mm.
BENEFITS
- Quick installation,
- Avoids compression of insulation,
- Improved thermal bridging.
Note: Channels and Ties are bought separately
Ancon 25-14 Restraint System.pdf
Brand: Ancon
Model and Size: 540mm
Delivery Time: 2 - 3 working days
540mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model and Size: 260mm
Delivery Time: 2 - 3 working days
260mm Staifix Resin/Resin Wall Tie is a masonry remedial wall tie for use for tying together two leaves of solid walls. This RR tie is used where mechanical expanders are unusable. Resin is added to both ends. A plastic sieve can be used to retain resin and is particularly useful in perfor..
Brand: Ancon
Model and Size: 305mm - BFL-7
Delivery Time: 1-3 working days
305mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Resin/Resin Wall Tie is a masonry remedial wall tie designed as a remedial tie for a separating wall. This RR Type A wall tie will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.CHARACTERIS..
Brand: Ancon
Model and Size: 275mm
Delivery Time: 2 - 3 working days
275mm Ancon Staifix RT2 Wall Tie is a low conductivity stainless steel general purpose wall tie for use in domestic houses and small commercial buildings up to 15 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be inst..
£13.43
£16.12 inc VAT