90mm JCW Acoustic Batten 90T
Guide Price
90mm JCW Acoustic Batten 90T
Guide Price: £6.38 (£7.66 inc VAT)
To add to cart change quantity to minimum of 175. If you need less, ask for a price or add to a quote list.
- Product Code: A1-2071
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 90x42x1800mm
- Weight: 2.90kg
Our ratings on 24-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
90mm JCW Acoustic Batten 90T
Width: 42mm
Length: 1800mm
Weight: 2.9kg
JCW Acoustic Batten 90T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 90T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On timber subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
CERTIFICATION
JCW Acoustic Batten 90T had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Guide Price
Brand: JCW
Model and Size: 600x600mm
Delivery Time: 2 - 3 working days
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots t..
Guide Price: £80.84
£97.01 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Cradle Packer
Delivery Time: 2 - 3 working days
2mm JCW Acoustic Cradle Packer also called a 2mm Packing Shims is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300..
Guide Price: £19.88
£23.86 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 2000mm - 2.40m2
Delivery Time: 2 - 3 working days
4mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are..
Guide Price: £56.82
£68.18 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 2 - 3 working days
37mm JCW Acoustic Deck 37, a 15mm resilient acoustic layer laminated to a 22mm T&G cement particle board, designed for fitting direct to joist. Acoustic Deck 37 is specially designed for direct to joist fitment after existing timber floor has been removed. After removing existing timber floors, ther..
Guide Price: £52.47
£62.96 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 5000mm - 6.00m2
Delivery Time: 2 - 3 working days
1.2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas a..
Guide Price: £51.77
£62.12 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 600mm - 0.72m2
Delivery Time: 2 - 3 working days
30mm JCW Stonefloor Slab is made from dense mineral wool slab designed for use on concrete subfloors. It is a high compressive strength dual density slab, which provides high thermal insulation properties for ground floors and acoustic insulation properties for separating floors. JCW Stonefloor Slab..
Guide Price: £19.11
£22.93 inc VAT