8X2 Stainless Steel Expanded Metal Lath Sheet - 700x2500mm
8X2 Stainless Steel Expanded Metal Lath Sheet - 700x2500mm
Guide Price: £57.77 (£69.32 inc VAT)
- Product Code: A1-2280
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 700x2500mm
- Weight: 1.50kg
Our ratings on 22-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
8X2 Stainless Steel Expanded Metal Lath Sheet - 700x2500mm
Width: 700mm
Length: 2500mm
Weight: 1.5kg
8x2 Stainless Sheet Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended stainless steel should be used. Grade 1.4301 Austenitic Stainless Steel to EN 10088-2. Gauge: 0.4mm
Installation
- Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.
- Timber Support - To connect to timber use plasterers nails & screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight.
- Metal Support - To fix steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a hairpin shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.
- To Solid Background - Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and a large diameter headed screw/nail that will keep the sheets firmly in place.
Note: Gloves should be worn as edges will be sharp. Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products.
Guide Price
Brand: Teco
Model and Size: 685x2438mm
Delivery Time: 1 - 2 days
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275. Gauge: 0.4mm ..
Guide Price: £9.79
£11.75 inc VAT
Brand: Teco
Model and Size: 900mm - 50m
Delivery Time: 1 - 2 days
900mm Galvanised Hex Mesh consists of a pattern of woven flat hexagonal shaped wires used for supporting rock wool, glass wool insulation, roof underlays, foil insulation. This mesh is easy to install and can be used on timber and steel framing. This Hex Mesh can also be used for floor screed reinfo..
Brand: Teco
Model and Size: 75mm - 90m
Delivery Time: 1 - 2 days
75mm wide open weave self-adhesive drywall scrim tape is used for reinforcing joints and patching repairs on plasterboard. 90m long roll. self-adhesive fibreglass mesh is thin and light, but extremely strong and easy to use and greatly increases joint strength and durability for less cracking.CHARAC..
Brand: Teco
Model and Size: WT250 - free delivery
Delivery Time: 2 - 3 working days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£66.49
£79.79 inc VAT
Guide Price
Brand: Teco
Model and Size: 135mm - Free Delivery
Delivery Time: 1 - 2 days
135mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs&..
Guide Price: £30.70
£36.84 inc VAT
Brand: Teco
Model and Size: 13mm - Abutting
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Abutting is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall..
Related Products
Brand: Insofast
Delivery Time: 999
Delivery Time: 1 - 2 days
105mm Staifix Insofast Anchor is a robust one-piece metal fastener designed to securely attach drywall and insulated plasterboard panels to walls. Thi..
£216.34
£259.61 inc VAT