8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Guide Price
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Guide Price: £9.79 (£11.75 inc VAT)
- Product Code: A1-2279
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 685x2438mm
- Weight: 1.50kg
Our ratings on 24-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Width: 685mm
Length: 2438mm
Weight: 1.5kg
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275. Gauge: 0.4mm
Hole width: 10mm Hole length: 20mm
Installation
- Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.
- Timber Support - To connect to timber use plasterers nails & screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight.
- Metal Support - To fix steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a hairpin shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.
- To Solid Background - Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and a large diameter headed screw/nail that will keep the sheets firmly in place.
Note: Gloves should be worn as edges will be sharp. Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products.
Brand: Teco
Model and Size: 6mm x 1m - Kit
Delivery Time: 1 - 2 days
6mm x 1m Stainless Steel Helical Bar is used for repairing cracks and reinforcing masonry in both new and existing masonry structures. The helical bar with its deformed fins makes the bonding far superior to standard reinforcing materials. The Masonry Crack Stitching System is fully certified.The Ma..
£105.25
£126.30 inc VAT
Brand: Teco
Model and Size: 900mm - 50m
Delivery Time: 1 - 2 days
900mm Galvanised Hex Mesh consists of a pattern of woven flat hexagonal shaped wires used for supporting rock wool, glass wool insulation, roof underlays, foil insulation. This mesh is easy to install and can be used on timber and steel framing. This Hex Mesh can also be used for floor screed reinfo..
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£55.22
£66.26 inc VAT
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£144.88
£173.86 inc VAT
Brand: Teco
Model and Size: 15mm - Abutting
Delivery Time: 1 - 2 days
15mm Galvanised Steel Drywall Feature Bead - Abutting is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes.&..
Brand: Teco
Model and Size: 12mm - 3m
Delivery Time: 1 - 2 days
12mm Galvanised Movement Mesh Beads are used to overcome movement tolerances in plaster and render finishes minimising racking in finished coat. It can also be used to act as a stop barrier for when a change in finish is required or type of render finish. 3m length. Galvanised steel EN 103..