8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Guide Price: £9.79 (£11.75 inc VAT)
- Product Code: A1-2279
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 685x2438mm
- Weight: 1.50kg
Our ratings on 20-12-2024:
4.7 out of 5 - Excellent
4.8 out of 5
8X2 Galvanised Expanded Metal Lath Sheet - 685x2438mm
Width: 685mm
Length: 2438mm
Weight: 1.5kg
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275. Gauge: 0.4mm
Hole width: 10mm Hole length: 20mm
Installation
- Fix with the long way of mesh running from support to support, with all strands sloping downwards and inwards from the face of the coating. Always ensure when fixing that allowance is made for overlapping sheets by 50mm lengthways and 25mm widthways.
- Timber Support - To connect to timber use plasterers nails & screws with washers or staples at 100mm centres. Start at the centre of the sheet and work out towards the edges. Always fix at an angle to allow lath to be pulled tight.
- Metal Support - To fix steel channels, tie with 1.2mm tying wire at 100mm centres. Tie by creating a hairpin shape with the wire, then pull tight and twist. Take care that cut wire ends are not close to plaster surface.
- To Solid Background - Expanded Metal Lath can be fixed to a solid background using a suitable fixing with an integral spacer/washer and a large diameter headed screw/nail that will keep the sheets firmly in place.
Note: Gloves should be worn as edges will be sharp. Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products.
Guide Price
Brand: Teco
Model and Size: 220mm - Free Delivery
Delivery Time: 1 - 2 days
220mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs&..
Guide Price: £34.32
£41.18 inc VAT
Guide Price
Brand: Teco
Model and Size: 600x2500mm
Delivery Time: 1 - 2 days
600x2500mm Galvanised Rib Lath, stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that..
Guide Price: £15.23
£18.28 inc VAT
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£55.22
£66.26 inc VAT
Brand: Teco
Model and Size: 15mm - 3m
Delivery Time: 1 - 2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Guide Price
Brand: Teco
Model and Size: 600x2500mm
Delivery Time: 1 - 2 days
600x2500mm Stainless Steel Rib Lath, stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern..
Guide Price: £32.95
£39.54 inc VAT
Guide Price
Brand: Teco
Model and Size: 685x2438mm
Delivery Time: 1 - 2 days
8x2 Galvanised Expanded Metal Lath Sheet is mainly used for internal and external plaster when applied on suspended ceilings and walls. It is also suitable for encasing steel columns and beams, assisting in the protection from fire. Galvanised Steel EN 10346 DX51D Z275. Gauge: 0.4mm ..
Guide Price: £9.79
£11.75 inc VAT