88mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
88mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
- Product Code: A1-1624
- Delivery Time: 2 - 4 days
- Brand: Cellecta (Tech. support: 01634296677)
- Model and Size: 600x2400mm - 1.44m2
- Weight: 20.81kg
Our ratings on 22-01-2025:
4.7 out of 5 - Excellent
4.8 out of 5
88mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
Width: 600mm
Length: 2400mm
Density: 164.2kg/m3
Weight/m2: 14.45kg
Weight: 20.81kg
Thermal Conductivity: 0.034W/mK
R-Value: 2.59m2K/W
Compressive Strength: 300kPa
88mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
CHARACTERISTICS
- High compressive strength,
- Interlocking, moisture resistant chipboard facing,
- Excellent life-long thermal performance,
- Quick to install,
- Able to withstand heavy point loads,
- Closed cell structure,
- Suitable for areas in close proximity to water,
- Blown with reclaimed CO2,
- 100% Recyclable,
- Super low U-values achievable
APPLICATION
Cellecta Hexatherm XCHiP is used for basements, above ground bearing concrete floor slabs, and on suspended beam and block floors.
CERTIFICATION
Manufactured in accordance with BS EN 13374 and tested to BS EN 12267
XChip_Suspended_Beam_and_Block_Floor_Thermal_Insulation_Below_Screed.pdf
Brand: Cellecta
Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
166mm Cellecta Hexatherm XCPL is a high performance extruded polystyrene thermal insulation board bonded to an high impact thermal laminate facing, suitable for car parks and soffits. It combines the benefits of high performance extruded polystyrene with a facing board to produce a composite th..
Brand: Cellecta
Model and Size: 10mm x 100mm - 50m
Delivery Time: 3 - 5 days
10mm x 100mm Cellecta Yelofon ES10 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATI..
Brand: Cellecta
Model and Size: 3mm
Delivery Time: 3 - 5 days
3mm Cellecta Rubberfon Packers is a part of a lightweight and extremely accurate levelling system that enables contractors to get the floors to within the nearest millimetre. It is a simple way to achieve high levels of acoustic insulation to meet Part E in concrete floors, while providing acceptabl..
Brand: Cellecta
Model and Size: 1200x2400mm - 2.88m2
Delivery Time: 2 - 4 days
112mm Cellecta Hexatherm XPLY is a high performance extruded polystyrene thermal insulation roof board bonded to a 12mm plywood laminate facing, also suitable for internal walls and floors. It combines the benefits of high performance extruded polystyrene with a facing board to produce a compos..
Brand: Cellecta
Model and Size: 600x1250mm - 2.25m2
Delivery Time: 2 - 4 days
140mm Cellecta Hexatherm XR is a specially designed closed cell extruded polystyrene board, ideal for for both internal and external wall applications for covering with plaster or render. The board's high comprehensive strength allows it to withstand withstand heavy point loads. The board is co..
Brand: Cellecta
Model and Size: 125mm - 2.5m
Delivery Time: 3 - 5 days
125mm Cellecta Unicloser X Single Flange Cavity Closer made of Hexatherm extruded polystyrene with one U-PVC damp proof course profiles. This cavity closer will eliminates cold bridging around window and door openings.CHARACTERISTICSHigh quality Hexatherm extruded polystyrene,Rigid U-PVC ..