87.5mm Unilin Safe-R SR/TB (75mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 4)
87.5mm Unilin Safe-R SR/TB (75mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 4)
Guide Price: £438.96 (£526.75 inc VAT)
Price per m2: £38.10/m2 (£45.73 inc VAT)
- Product Code: A1-4880
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model and Size: 2400x1200 - 11.52m2
Our ratings on 21-02-2025:
4.7 out of 5 - Excellent
4.8 out of 5
87.5mm Unilin Safe-R SR/TB (75mm Phenolic Core + 12.5mm Plasterboard) - Dot & Dab (pack of 4)
Length: 2400mm
Width: 1200mm
Height: 87.5mm
Pack Quantity: 4
Board Coverage: 2.88m2
Pack Coverage: 11.52m2
Thermal Conductivity: 0.021W/mK
R-Value: 3.6m2K/W
Note: This composite plasterboard was formerly known as 87.5mm Xtratherm Safe-R Thermal Liner SR/TB
CHARACTERISTICS
- Superior performance phenolic foam,
- Effective thermal and fire performance,
- Can be readily cut using a sharp knife or fine toothed saw,
- Low smoke obscuration,
- Low risk fire rating - Class 0,
- HCFC/CFC Free,
- Zero ODP,
- Rot proof and will remain effective for the life span of the building,
- Reaction to fire: Euroclass B-s1, d0
APPLICATION
- Internal wall drylining for new build or refurbishment
INSTALLATION
- Align the SR/TB board squarely on wall.
- Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler.
- Mark the position of the panel on the wall. Apply adhesive dabs to the wall in accordance with BS8212:1986 & BS 800: Part 8: 1994.
- Vertical dabs @ 300mm centres 25mm in from edge. Dabs 50-75mm wide approx 25mm deep to allow for tamping. Total contact with boards area should be 20%.
- Lift the SR/TB board into position using wedges on the floor.
- Apply pressure to the board to level and embed in the adhesive.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- When the adhesive has dried, 3 fireproof mechanical fixings should be fixed through the centre of the board.
CERTIFICATION
Unilin_SR_TB_Datasheet.pdf
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 8.64m2
Delivery Time: 1-3 working days
125mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin-R F..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
25mm Unilin Thin-r XT/TF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings for use in timber framed walls. Unilin XT/TF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/TF is CFC & HCFC free and is manufactured u..
Guide Price: £14.34
£17.21 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
150mm Unilin FR-BGM is a a BBA certified high performance PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. Unilin FR-BGM is suitable to apply torch on felt directly on the insulation...
Guide Price: £140.80
£168.96 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
50mm Unilin Thin-r XT/PR-UF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings. Unilin XT/PR-UF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/PR-UF is CFC & HCFC free and is manufactured under the high..
Guide Price: £22.40
£26.88 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 5.76m2
Delivery Time: 3 - 5 days
110mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £134.70
£161.64 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x450mm - 2.16m2
Delivery Time: 1-3 working days
110mm Unilin ECO360/CT CavityTherm Full Fill Cavity Wall board has a core of modified polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin ECO360 CT board reduces the junctions prone to ..