80mm JCW Acoustic Batten 80T
Guide Price
80mm JCW Acoustic Batten 80T
Guide Price: £5.99 (£7.19 inc VAT)
To add to cart change quantity to minimum of 175. If you need less, ask for a price or add to a quote list.
700 or more £6.46 (£7.75 inc VAT)
1050 or more £6.04 (£7.25 inc VAT)
- Product Code: A1-1976
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 80x42x1800mm
- Weight: 2.90kg
Our ratings on 05-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
80mm JCW Acoustic Batten 80T
Width: 42mm
Length: 1800mm
Weight: 2.9kg
JCW Acoustic Batten 80T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 80T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On timber subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
JCW Acoustic Batten 80T had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Batten-80T-Datasheet.pdf
Guide Price
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 7 - 10 days
50mm JCW Noise Stopper Pad is an aluminium non-flammable foil covered pad with 2 layers of non-flammable sound absorbing acoustic mineral wool with a mineral loaded sound barrier mat core layer. This sound blocking pad designed to be laid on top of suspended ceiling grid tiles in offices and rooms. ..
Guide Price: £17.05
£20.46 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Cradle Packer
Delivery Time: 2 - 3 working days
2mm JCW Acoustic Cradle Packer also called a 2mm Packing Shims is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300..
Guide Price: £19.88
£23.86 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200mm x 1200mm - 1.44m2
Delivery Time: 2 - 3 working days
16.5mm JCW Noiseboard 10 is an acoustic wall liner manufactured by laminating a 4mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It is a high-performance acoustic overlay improvement board, specifically designed for both new..
Guide Price: £42.73
£51.28 inc VAT
Brand: JCW
Model and Size: 100mm - Free Delivery
Delivery Time: 3 - 5 days
100mm JCW Acoustic Isolating Strip is used for preventing sound transfer by isolating partitioning or party walls from ceiling and floorboards and also from joists that the floor is attached to. It can be used in all forms of construction where there is any point of contact. The strip is manufacture..
Guide Price
Brand: JCW
Model and Size: 2400mm x 600mm - 1.44m2
Delivery Time: 2 - 3 working days
33mm JCW Acoustic Deck 33 is a Chipboard based acoustic overlay board for use with PCT timber floor constructions or as direct to joist board for timber floors. It is 18mm t&g chipboard laminated to a with a pre-bonded 15mm acoustic resilient foam layer.CHARACTERISTICSAn ideal solution where con..
Guide Price: £58.52
£70.22 inc VAT
Guide Price
Brand: JCW
Model and Size: Single x 47mm deep
Delivery Time: 2 - 3 working days
Single x 47mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £4.31
£5.17 inc VAT