75mm Heaveguard - Expanded Polystyrene Board Used Against Ground Heave - 2400mm x 1200mm
75mm Heaveguard - Expanded Polystyrene Board Used Against Ground Heave - 2400mm x 1200mm
- Product Code: A1-3741
- Delivery Time: 2 - 3 working days
- Brand: Cordek
- Model and Size: 2400x1200mm - 2.88m2
Our ratings on 21-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
75mm Heaveguard - Expanded Polystyrene Board Used Against Ground Heave - 2400mm x 1200mm
Width: 1200mm
Length: 2400mm
Board Coverage: 2.88m2
75mm Heaveguard is a compressible low density Expanded Polystyrene (EPS) board, used when foundations need to be protected against ground heave and against lateral heave. Heaveguard is used to prevent potential problems in foundations due to moisture movement in soils, such as clay heave, reducing pressure on ground beams in piled foundations, and on the sides of trench fills. The expansion and contraction process during wet and dry periods is known as clay heave and this can cause severe problems with foundations. Heaveguard can be used as permanent shuttering for cast in-situ reinforced concrete.
APPLICATION
- When foundations need to be protected against ground heave and against lateral heave.
CHARACTERISTICS
- A rapid, cost effective solution to clay-heave problems,
- The initial compression of the material during casting can be disregarded,
- It is rot-proof and durable and will withstand the conditions encountered below ground,
- It will not degrade in the presence of high levels of ground water or precipitation.
CERTIFICATION
- BBA Certified - Certificate number 17/5448.
Heaveguard_data_sheet.pdf
Brand: Cordek
Model and Size: 220mm x 450mm x 450mm
Delivery Time: 2 - 3 working days
220mm x 450mm x 450mm Heaveguard Pile Collar is a compressible low density Expanded Polystyrene (EPS), used to support pile heads against lateral ground heave. It is a part of the Cordek Cellcore ground heave system. The pile collar will fit securely around the pile head to produce a square ed..
Brand: Cordek
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 3 - 5 days
135mm Cordek Cellvent HX - Grade 18/24 is a product specially designed to provide foundation protection from ground heave effects whilst also providing an excellent gas venting medium when installed under reinforced concrete floor slabs where subsidence is not expected. Cellvent HX provides protecti..
Brand: Cordek
Model and Size: 85mm x 600mm x 600mm
Delivery Time: 2 - 3 working days
85mm x 600mm x 600mm Heaveguard Pile Collar is a compressible low density Expanded Polystyrene (EPS), used to support pile heads against lateral ground heave. It is a part of the Cordek Cellcore ground heave system. The pile collar will fit securely around the pile head to produce a square edg..
Brand: Cordek
Model and Size: 85mm x 450mm x 450mm
Delivery Time: 2 - 3 working days
85mm x 450mm x 450mm Heaveguard Pile Collar is a compressible low density Expanded Polystyrene (EPS), used to support pile heads against lateral ground heave. It is a part of the Cordek Cellcore ground heave system. The pile collar will fit securely around the pile head to produce a square edg..
Brand: Cordek
Model and Size: 2400x1200mm - 2.88m2
Delivery Time: 3 - 7 days
225mm Cellcore HX S is a product specially designed to provide foundation protection from ground heave effects when installed under reinforced concrete floor slabs. It is consisted of specially moulded hexagonal cellular expended polystyrene, available in a number of different depths and grades..
Brand: Cordek
Model and Size: 220mm x 600mm x 600mm
Delivery Time: 2 - 3 working days
220mm x 600mm x 600mm Heaveguard Pile Collar is a compressible low density Expanded Polystyrene (EPS), used to support pile heads against lateral ground heave. It is a part of the Cordek Cellcore ground heave system. The pile collar will fit securely around the pile head to produce a square ed..