72.5mm Unilin Safe-R SR/TB (60mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 5)



Guide Price



72.5mm Unilin Safe-R SR/TB (60mm Phenolic Core and 12.5mm Plasterboard) - Dot and Dab (pack of 5)
Guide Price: £461.15 (£553.38 inc VAT)
Price per m2: £32.02/m2 (£38.43 inc VAT)
- Product Code: A1-4879
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model and Size: 2400x1200 - 14.40m2
Our ratings on 01-04-2025:

4.7 out of 5 - Excellent


4.8 out of 5
72.5mm Unilin Safe-R SR/TB (60mm Phenolic Core + 12.5mm Plasterboard) - Dot & Dab (pack of 5)
Length: 2400mm
Width: 1200mm
Height: 72.5mm
Pack Quantity: 5
Board Coverage: 2.88m2
Pack Coverage: 14.4m2
Thermal Conductivity: 0.021W/mK
R-Value: 2.9m2K/W
Note: This composite plasterboard was formerly known as 72.5mm Xtratherm Safe-R Thermal Liner SR/TB

CHARACTERISTICS
- Superior performance phenolic foam,
- Effective thermal and fire performance,
- Can be readily cut using a sharp knife or fine toothed saw,
- Low smoke obscuration,
- Low risk fire rating - Class 0,
- HCFC/CFC Free,
- Zero ODP,
- Rot proof and will remain effective for the life span of the building,
- Reaction to fire: Euroclass B-s1, d0
- Internal wall drylining for new build or refurbishment
- Align the SR/TB board squarely on wall.
- Allow a 15mm expansion joint at the top and bottom of the panel, and fill with foam filler.
- Mark the position of the panel on the wall. Apply adhesive dabs to the wall in accordance with BS8212:1986 & BS 800: Part 8: 1994.
- Vertical dabs @ 300mm centres 25mm in from edge. Dabs 50-75mm wide approx 25mm deep to allow for tamping. Total contact with boards area should be 20%.
- Lift the SR/TB board into position using wedges on the floor.
- Apply pressure to the board to level and embed in the adhesive.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- When the adhesive has dried, 3 fireproof mechanical fixings should be fixed through the centre of the board.

Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x450mm - 4.86m2
Delivery Time: 2 - 3 working days
60mm Unilin Safe-R SR/CW Phenolic Foam Insulation Board is a superior performance rigid partial fill cavity insulation board with enhanced fire performance, consisting of an Euroclass D-s1, d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/CW is faced with low emissivity alum..
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 5.76m2
Delivery Time: 3 - 5 days
110mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £134.70
£161.64 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 1200mm - 11.52m2
Delivery Time: 3 - 5 days
60mm Unilin FR/MG is a high performance PIR core with mineral coated glass facers suitable for use below single ply waterproofing systems and partially bonded built-up felt. It is compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed ..
Guide Price: £166.29
£199.55 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
40mm Unilin Thin-r XT/TF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings for use in timber framed walls. Unilin XT/TF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/TF is CFC & HCFC free and is manuf..
Guide Price: £20.83
£25.00 inc VAT
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 2.88m2
Delivery Time: 2 - 3 working days
86mm Unilin Safe-R SR/STP Phenolic Soffit Plus Board (80mm Phenolic + 6mm Building Panel) is a superior performance ceiling insulation board with enhanced fire performance, consisting of an Euroclass B s1 d0 phenolic foam core with negligible smoke obscuration. Unilin Safe-R SR/STP phenolic core is ..
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
92.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 80mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one oper..