600x2500mm Stainless Steel Rib Lath Sheet
600x2500mm Stainless Steel Rib Lath Sheet
Guide Price: £32.95 (£39.54 inc VAT)
- Product Code: A1-2282
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 600x2500mm
- Weight: 1.50kg
Our ratings on 22-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
600x2500mm Stainless Steel Rib Lath Sheet
Width: 600mm
Length: 2500mm
Weight: 1.5kg
600x2500mm Stainless Steel Rib Lath, stiffened by longitudinal ribs, for use on ceilings and partitions. For internal and external plaster key applications and anti-crack control. In external applications and where there is regular exposure to moisture, heavy condensation, persistent damp or concern that drying out times may be extended stainless steel should be used. Made from austenitic stainless steel to EN 10088-2.
Installation
- Rib Lath is fixed so that the tip of the rib is placed against the supporting background. The rib of the sheet should run at right angles to any supports. Ensure that the sheets are overlapped by a minimum of 50mm end to end and by 25mm widthways and that the ribs are nestled together.
- Timber Support - Rib Lath is fixed at each rib to timber supports using plasterers nails, screws or staples. Ensure that compatible corrosion resistant fixings are used, i.e. do not used galvanised fixings for stainless steel.
- Metal Support - Rib lath is fixed at each rib to metal support using 1.63mm galvanised or stainless steel tying wire. When joining Rib Lath sheets overlap the edge ribs and tie the edges with 1.22mm tying wire at 150mm centres.
- Solid Background - Rib Lath can be fixed to a solid background using a suitable fixing which holds the ribs firmly against the background. Where sheets are installed vertically, fixings should be positioned through all ribs at 600mm centres to ensure adequate stability.
- Always ensure that compatible corrosion resistant fixings are used, i.e. do not used galvanised fixings with stainless steel products or vice versa.
Note: Gloves should be worn as edges will be sharp. Ensure that compatible corrosion resistant fixings are used; i.e. do not use galvanised fixings with stainless products.
Fixing Rib Lath to Solid Backgrounds
Brand: Teco
Model and Size: 900mm - 50m
Delivery Time: 1 - 2 days
900mm Galvanised Hex Mesh consists of a pattern of woven flat hexagonal shaped wires used for supporting rock wool, glass wool insulation, roof underlays, foil insulation. This mesh is easy to install and can be used on timber and steel framing. This Hex Mesh can also be used for floor screed reinfo..
Brand: Teco
Model and Size: WT225 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£144.88
£173.86 inc VAT
Brand: Teco
Model and Size: 13mm - Abutting
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Abutting is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall..
Guide Price
Brand: Teco
Model and Size: 135mm - Free Delivery
Delivery Time: 1 - 2 days
135mm Helical Flat Roof Fixings for Warm Roofs. A new fixing for securing structural 6 mm plywood composite insulation. 16-20 fixings needed per 1200x2400mm board depending on rafter spacing.APPLICATIONHammer driven fixing for securing structural 6mm plywood composite insulation board to flat roofs&..
Guide Price: £30.70
£36.84 inc VAT
Brand: Teco
Model and Size: WT250 - free delivery
Delivery Time: 1 - 2 days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£193.91
£232.69 inc VAT
Brand: Teco
Model and Size: 13mm - Engaging
Delivery Time: 1 - 2 days
13mm Galvanised Steel Architrave Feature Bead - Engaging is for use on traditional wet 2 or 3 coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall fini..