5mm Sempatap Thermal Insulating Wallpaper - 1m x 12.5m roll
5mm Sempatap Thermal Insulating Wallpaper - 1m x 12.5m roll
Price: £307.97 (£369.56 inc VAT)
Price per m2: £24.64/m2 (£29.57 inc VAT)
- Product Code: A1-2587
- Delivery Time: 2 - 3 working days
- Brand: MGC (Tech. support: 01372743334)
- Model and Size: 1000x12500 - 12.5m2
- Weight: 18.75kg
Our ratings on 23-12-2024:
4.7 out of 5 - Excellent
4.8 out of 5
5mm Sempatap Thermal Insulating Wallpaper - 1m x 12.5m roll
Width: 1000mm
Weight/m2: 1.5kg
Weight: 18.75kg
Thermal Conductivity: 0.074W/mK
5mm Sempatap is made from a natural latex with a durable woven fibre-glass face. It is in an open and closed cellular construction, which allows the substrate to breathe. Sempatap wallpaper rolls are 1 metre wide and 12.5 metres long. The adhesive is water-based, therefore there are no nasty smells and work can be undertaken without tenants vacating the property. It can be decorated with virtually anything, even tiled and redecoration is very easy as the fibre-glass finish allows the removal of old wallpaper via any method without damage to the Sempatab underneath. Sempatap eliminates black mould problems, dramatically reduces condensation and provides warmer healthier living conditions. Sempatap has very good sound absorption properties and is particularly useful in helping to overcome problems of reverberation and sound transmittance between neighbouring flats.
CHARACTERISTICS
- Simple and easy as wallpaper to apply.
- When applied to the internal surfaces of external walls, substantially lowers heat loss, dramatically reduces condensation and immediately makes rooms warmer and more comfortable.
- Can be decorated with virtually any finish - emulsion, wallpaper and it can even be tiled.
- It has a life expectancy of 30 years and can be redecorated time and time again with no problem.
- Saves money in the long run.
- Does not reduce the room size significantly, there is therefore no need to re-site and extend electrics and plumbing or reduce and refit floor coverings.
- To the internal face of the external walls of a property, it is not necessary to apply the insulation to internal party walls.
- In any type of solid wall house including solid brick, solid stone, concrete, on cavity wall flats and houses, particularly north east facing bedrooms.
- On the ceilings of flat roof extensions where there is little or no roof insulation.
- For alleviating cold bridge problems caused by cantilever beams with walkways, ring beams, balconies and bridging from Finlock gutters.
- Dormer ceilings and mansard roofs.
- Mould growth on walls and ceilings must be treated first.
- Remove any wallpaper and prepare the walls and ceilings.
- If the plaster on your wall is very old and porous, apply a coat of Sempatap 'A' Primer and allow to dry.
- If your skirting is less than 10mm wide on the top edge you will need Sempatap Skirting Channel which is a white plastic track and will give a neat finish to the bottom edge of Sempatap.
- Fix the channel on the wall above the skirting using No Nails adhesive after preparation is completed and before application of Sempatap Adhesive. Alternatively you can fix a 10mm wood bead along the top of the skirting and butt joint the Sempatap to it.
- Apply a liberal coat of Sempatap Adhesive to the wall using a notched Sempatap Adhesive Spreader, notched trowel or medium pile roller. Only apply the adhesive to one drop length area at a time. For subsequent lengths apply the Sempatap Adhesive not only to the wall but also to the vertical edge of the previously hung length of Sempatap.
- Sempatap Thermal is applied foam side to the wall. Cut Sempatap Thermal to required length using wallpaper shears or large scissors allowing 25mm overlap at each end then roll up with foam side facing out.
- Apply Sempatap Thermal to wet adhesive on the top of the wall at the junction with the ceiling then roll out and smooth using the Sempatap Spatula.
- When Sempatap is in the required position, apply firm pressure using the Sempatap Spatula, smoothing out any air pockets.
- Continue application of Sempatap by applying subsequent lengths until the wall is covered but leaving a narrow gap of 1-2mm between each drop.
- For application to flat ceilings, dormers and mansard roofs, apply the Sempatap Adhesive to the ceiling surface, leave for 10-15 minutes to go tacky then apply Sempatap Thermal as per instructions above.
CERTIFICATION
Sempatap is approved as an Energy Saving Product by the Energy Saving Trust and is an EST Recommended product for the insulation of solid wall homes. It has been tested by the National Physical Laboratory and figures produced by the Building Research Establishment show considerable carbon saving.
PDF Sempatap Thermal ApplicationPlease note: this product is non-returnable once purchased. Terms and conditions apply.
Sempatap Thermal Application Instructions.pdf
Brand: MGC
Model and Size: pack of 5
Delivery Time: 2 - 3 working days
Sempatherm Radiator Insulation Panels would reduce the amount of heat loss from radiators into the walls. The panel profile would substantially improve air circulation to make rooms warmer and to eliminate cold spots. These panels are easy to install and would help to reduce your fuel bill. They hav..
£30.19
£36.23 inc VAT
Brand: MGC
Model and Size: 60cm
Delivery Time: 2 - 3 working days
Sempaflue Inflation Tube - 60cm, which is used to pump air into Sempaflue Chimney Balloons. The Chimney Balloon is simply inflated and placed within the chimney cavity. The Balloons unique shape would leave small air gaps in two corners, allowing air to ventilate the chimney.Please note: this produc..
£2.58
£3.10 inc VAT
Brand: MGC
Model and Size: MGC RTL Pack
Delivery Time: 2 - 3 working days
The MGC RLT Pack is used for treating medium to severe mould contamination. The pack contains sufficient material to eradicate 45-50m of mould. RLT Bactdet 05 is used to kill and clean the mould off the surface of the walls and ceilings, RLT Halophen to penetrate into the substrate to kill the ..
£141.90
£170.28 inc VAT
Brand: MGC
Model and Size: 5 litres
Delivery Time: 2 - 3 working days
Biocheck Allweather Pliolite Paint is a high quality long-term performance exterior masonry paint that would resist the elements such as wind-driven rain, sun, temperature extremes and atmospheric pollution and retain its decorative appearance. Its active Biocide would resist the growth of algae. Av..
£57.57
£69.08 inc VAT
Brand: MGC
Model and Size: 2.5 litres
Delivery Time: 2 - 3 working days
2.5 Litre MGC One Coat Damp Seal is a high performance interior paint which permanently covers damp, water stains and most household stains. It dries with a long lasting permanent seal over damp walls and ceilings and can be painted over with emulsion or gloss paint or the surfaces wallpapered...
£53.19
£63.83 inc VAT
Brand: MGC
Model and Size: mega moisture trap refill
Delivery Time: 3 - 5 days
Mega Moisture Trap Refill, which captures up to 2 litres of water and prevents condensation and damp in the home, lasts for about 2 months. It can be placed on a window sill in your bathroom or utility. A very efficient, cost effective solution to damp and condensation.Simple to use,Prevents da..
£4.81
£5.77 inc VAT
Related Products
Brand: MGC
Delivery Time: 999
Delivery Time: 1-3 working days
Sempatap Thermal Adhesive has been specifically designed for installation of Sempatap Thermal solid wall insulation rolls also available in Insulation..
£56.92
£68.30 inc VAT
Brand: MGC
Delivery Time: 999
Delivery Time: 1-3 working days
Sempatap Thermal Sealant is a non-silicone based sealant that has been specifically designed for bonding seams and joints of Sempatap Therma..
£57.57
£69.08 inc VAT
Brand: MGC
Delivery Time: 999
Delivery Time: 1-3 working days
Use for taping joins, junctions, corners and edges to achieve a smooth professional finish, Use to cover all external corners, where Sempatap is used ..
£37.79
£45.35 inc VAT
Brand: MGC
Delivery Time: 999
Delivery Time: 1-3 working days
10mm Sempatap Skirting Channel is used to provide a neat finish to skirting where the top edge is less than 10mm wide. It can also be used surrounding..
£4.80
£5.76 inc VAT
Brand: MGC
Delivery Time: 999
Delivery Time: 2 - 3 working days
Sempatap "A" Primer is a water based primer for absorbent surfaces. Use for pre-treating highly absorbent surfaces, such as plaster, plaster boards, p..
£39.50
£47.40 inc VAT
Brand: MGC
Delivery Time: 999
Delivery Time: 2 - 3 working days
Sempatap Spatula is a plastic spatula for applying, smoothing out and firming up Sempatap, Sempatap Thermal and Sempafloor. It is also used tucking/fo..
£5.92
£7.10 inc VAT
Brand: MGC
Delivery Time: 999
Delivery Time: 2 - 3 working days
Sempatap Adhesive Spreader is a metal notched trowel. for applying, smoothing out and firming up Sempatap, Sempatap Thermal and Sempafl..
£5.75
£6.90 inc VAT