58mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
58mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
- Product Code: A1-1620
- Delivery Time: 2 - 4 days
- Brand: Cellecta (Tech. support: 01634296677)
- Model and Size: 600x2400mm - 1.44m2
- Weight: 19.01kg
Our ratings on 18-11-2025:
4.8 out of 5
58mm Cellecta Hexatherm XCHiP Thermal Laminate Chipboard - XPS Insulation
Width: 600mm
Length: 2400mm
Density: 227.6kg/m3
Weight/m2: 13.2kg
Weight: 19.01kg
Thermal Conductivity: 0.033W/mK
R-Value: 1.76m2K/W
Compressive Strength: 300kPa
58mm Cellecta XCHiP is a high performance insulation board with a 18mm chipboard laminate facing. Cellecta XCHiP combines the benefits of HEXATHERM high performance thermal insulation with a P5 moisture resistant, tongue and groove chipboard to produce a high compressive strength, interlocking floor board.
CHARACTERISTICS
- High compressive strength,
- Interlocking, moisture resistant chipboard facing,
- Excellent life-long thermal performance,
- Quick to install,
- Able to withstand heavy point loads,
- Closed cell structure,
- Suitable for areas in close proximity to water,
- Blown with reclaimed CO2,
- 100% Recyclable,
- Super low U-values achievable
APPLICATION
Cellecta Hexatherm XCHiP is used for basements, above ground bearing concrete floor slabs, and on suspended beam and block floors.
CERTIFICATION
Manufactured in accordance with BS EN 13374 and tested to BS EN 12267
XChip_Suspended_Beam_and_Block_Floor_Thermal_Insulation_Below_Screed.pdf
Brand: Cellecta
Model and Size: 1.5m x 50m - 75m2
Delivery Time: 2 - 3 working days
Cellecta HexaTex is a high performance thermal improvement membrane suitable for use on inverted roofs finished with gravel ballast, and concrete pavers on appropriate supports. Dramatically minimises the cooling effect associated with rainwater flowing down through the insulation and draining away...
Brand: Cellecta
Model and Size: 75mm - 2.5m
Delivery Time: 3 - 5 days
75mm Cellecta Unicloser X Single Flange Cavity Closer made of Hexatherm extruded polystyrene with one U-PVC damp proof course profiles. This cavity closer will eliminates cold bridging around window and door openings.CHARACTERISTICSHigh quality Hexatherm extruded polystyrene,Rigid U-PVC profile,Eli..
Brand: Cellecta
Model and Size: 600x2500mm - 1.50m2
Delivery Time: 7 - 10 days
500 grade Cellecta XFLO FF Underfloor Heating Insulation Board is a high performance extruded polystyrene underfloor insulation board, featuring channels to suit different pipe diameters and spacing required. Once covered with ScreedBoard 20, they would provide a quality heating solution for domesti..
Brand: Cellecta
Model and Size: 5mm x 60mm - 50m
Delivery Time: 3 - 5 days
5mm x 60mm Cellecta Yelofon ES5 Edge Strip is a Perimeter Flanking Isolation, a non cross linked, closed cell polyethylene strip to eliminate perimeter flanking transmission. For use with Screedboard 28 and 30.CHARACTRISTICSExcellent acoustic performance,Very quick and easy installation.APPLICATIONC..
Brand: Cellecta
Model and Size: 600x2500mm - 1.50m2
Delivery Time: 2 - 4 days
100mm Cellecta Hexatherm XPERi board has an outstanding compressive strength, low water absorption and life-long thermal performance, make them the ideal insulation for basements and below ground applications. They feature an interlocking edge detail and are suitable for fixing externally again..
Brand: Cellecta
Model and Size: 600x2500mm - 1.50m2
Delivery Time: 2 - 4 days
25mm Hexatherm XFLOOR 250 extruded polystyrene thermal insulation boards are designed specifically for domestic, commercial and industrial flooring applications where a high resistance to compression and water absorption is required. XFLOOR floor insulation boards are ideal for a multitude of floor re..