42.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (30mm PIR Insulation bonded to 12.5mm Plasterboard)
42.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (30mm PIR Insulation bonded to 12.5mm Plasterboard)
Guide Price: £53.97 (£64.76 inc VAT)
Price per m2: £18.74/m2 (£22.49 inc VAT)
- Product Code: A1-2261
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: 1200x2400 - 2.88m2
- Weight: 26.76kg
Due to nationwide shortage of PIR insulation lead time may be longer for this product.
Our ratings on 22-12-2024:
4.7 out of 5 - Excellent
4.8 out of 5
42.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (30mm PIR Insulation bonded to 12.5mm Plasterboard)
Width: 1200mm
Length: 2400mm
Density: 218.6kg/m3
Weight/m2: 9.29kg
Weight: 26.76kg
Thermal Conductivity: 0.022W/mK
R-Value: 1.36m2K/W
Compressive Strength: 140kPa
Board Coverage: 2.88m2
42.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 30mm Xtratherm Polyiso (PIR) core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. XT/TL-MF is designed to provide high levels of thermal insulation and dry lining in one operation for suitable masonry walls, sloped rafters and ceilings in new build and refurbishment situations. XT/TL-MF is only suitable for mechanical fixed applications.
Manufactured to strict EN 13165 standards, the closed cell structure and gas tight facings provides excellent thermal performance and moisture resistance. Xtratherm Thin-R products deliver genuine thermally robust performances and are supported with full third party assurances throughout the range.
CHARACTERISTICS
- High Thermal Performance
- Certified Thermal Conductivity as low as 0.022W/mK
- 12.5mm tapered edge plasterboard. (You can also order square edge plasterboard.)
- Integral Vapour Control Layer
- Low Emissivity Foil Facings
- Energy Saving Trust Approved Product
- HCFC/CFC Free, GWP <5
- BRE Green Guide A+ Rated
- Non-deleterious material
- Closed cell structure – moisture resistant
- Easy to Install
APPLICATION
- Masonry walls
- Sloped rafters
- Ceilings
INSTALLATION
- Mechanical Fixing XT/TL-MF Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the XT/TL-MF Thermal Liner into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge. The fixings (thermally broken) should penetrate at least 25mm into the batten.
- Installation must be in accordance with good dry lining practice. BS 8212:1988 should be considered, careful setting out and planning is essential, fill any gaps with foam filler.
CERTIFICATION
- This product is manufactured in accordance with BS/IS EN 13165:2008
- BS EN ISO 9001 Quality Management Systems
- BS EN ISO 14001 Environmental Management Systems
- BS OHSAS 18001 Health & Safety Management Systems
- Energy Savings Trust Recommended Product
Xtratherm Thin-R-XT-TL-MF.pdf
Brand: Xtratherm
Model and Size: 2400x1200mm - 11.52m2
Delivery Time: 1-3 working days
100mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use be..
Brand: Xtratherm
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
34.5mm Xtratherm XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 25mm Xtratherm PIR core faced with composite kraft paper bonded to 9.5mm tapered edge plasterboard, specially designed for internal walls dry lining and insulation, due to i..
Guide Price
Brand: Xtratherm
Model and Size: 2400x1200mm - 11.52m2
Delivery Time: 2 - 3 working days
75mm Xtratherm Safe-R is an advanced rigid insulation that delivers outstanding performance and exceptional fire resistance. It features a Class O phenolic foam core with minimal smoke obscuration. Safe-R is covered on both sides with low emissivity aluminum facings, providing an impressive thermal ..
Guide Price: £328.37
£394.04 inc VAT
Brand: Xtratherm
Model and Size: 2400x1200mm - 17.28m2
Delivery Time: 2 - 3 working days
50mm Xtratherm Safe-R SR/ST Phenolic foam is a superior performance rigid insulation soffit board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/ST is faced with low emissivity aluminium facings both sides, and has a thermal co..
Brand: Xtratherm
Model and Size: 2400x1200mm - 11.52m2
Delivery Time: 2 - 3 working days
80mm Xtratherm Safe-R SR/ST Phenolic foam is a superior performance rigid insulation soffit board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/ST is faced with low emissivity aluminium facings both sides, and has a thermal co..
Brand: Xtratherm
Model and Size: 1200x2400mm - 5.76m2
Delivery Time: 1-3 working days
150mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performa..