415mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 275mm Cavity

415mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 275mm Cavity
- Product Code: A1-5398
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 415mm
Our ratings on 17-04-2025:

4.7 out of 5 - Excellent


4.8 out of 5
415mm Ancon Teplo-R Wall Tie - Remedial Wall Tie - for 275mm Cavity
Length: 415mm
Pack Quantity: 1
Cavity width: 275mm
415mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall tie that can be resin-fixed in remedial and retrofit applications. This tie has a thermal conductivity of only 0.7 W/mK. Requires Ø10mm hole. A stainless steel sieve may be used to retain resin and is particularly useful in perforated brick or hollow blockwork. A 12mm hole is required to fit the sieve.
CHARACTERISTICS
- Manufactured from basalt fibres set in a resin matrix,
- 7mm diameter,
- Suitable for 275mm cavity.
Brand: Ancon
Model and Size: 265mm - 7mm
Delivery Time: 3 - 5 days
265mm Ancon Teplo-L-Tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It has stainless steel upstand with a 7mm fixing hole for a second..
Guide Price: £3.35
£4.02 inc VAT
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Resin/Resin Wall Tie is a masonry remedial wall tie designed as a remedial tie for a separating wall. This RR Type A wall tie will normally be inserted in 10mm Ø holes and resin-bonded into both leaves. It meets the requirements of a Type A wall tie to Approved Document E.CHARACTERIS..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed..
£23.52
£28.22 inc VAT
Brand: Ancon
Model and Size: 275mm
Delivery Time: 3 - 5 days
275mm Ancon Teplo-BF-2 Wall Tie is a smart black general purpose composite wall tie manufactured from pultruded basalt fibres with a thermal conductivity of 0.7 W/mK, which helps to prevent heat escape from the building. The Teplo-BF-2 has specialised moulded safety ends which offer improved bu..
Guide Price: £2.31
£2.77 inc VAT
Brand: Ancon
Model and Size: CFS120
Delivery Time: 2 - 5 working days
Ancon CFS120 Concrete Fixing Screws is used to fix an outer leaf of brickwork through any kind of insulation to a concrete wall. These zinc plated carbon steel screws should be used in combination with Ancon Compression Sleeves in the same length as the insulation thickness being used..