4.2x13mm Wafer Head Screw with Drill Point for Thicker Gauge Steel - box of 1000
4.2x13mm Wafer Head Screw with Drill Point for Thicker Gauge Steel - box of 1000
- Product Code: A1-3287
- Delivery Time: 1 - 2 days
- Brand: Various
- Model and Size: 4.2x13mm - for thicker gauge steel
- Weight: 1.00kg
Our ratings on 27-01-2025:
4.7 out of 5 - Excellent
4.8 out of 5
Brand: Various
Model and Size: 3.5x45mm - coarse point
Delivery Time: 1 - 2 days
3.5x45mm Coarse Thread Sharp Point high quality screws have been specially developed for fixing plasterboard on to timber frameworks of differing thicknesses, to be used for both wall and ceiling applications in interior and exterior applications. Screw directly into timber, no pre drilling req..
£18.03
£21.64 inc VAT
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 4 - 7 days
118mm Structural Insulated Panel (SIP) comprises a 100mm thick core of rigid Expanded Polystyrene (EPS) insulation sandwiched between two 9mm thick Oriented Strand Board (OSB) sheets. It is an advanced building component designed for high-performance and energy-efficient construction. Sandwiched bet..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
42.5mm Acoustic and Thermal Wall Panel is a 30mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm soundproof plasterboard (A2), which would not only reduce sound transmission through walls, but also give you fire safety. The Rockwool slab is made from volcanic rock, ..
Brand: Various
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 2 - 5 working days
32.5mm Thermal and Acoustic Wall Panel is a 20mm rigid high density thermal and acoustic Rockwool insulation slab bonded to 12.5mm fire resistant plasterboard (A2), which would not only reduce sound transmission through walls, but also give you fire safety. The Rockwool slab is made from volcanic ro..
Brand: Various
Model and Size: Glasroc Strips
Delivery Time: 2 - 5 working days
Cut to Size Glasroc Strips for Deflection Heads are used in plasterboard partitions to allow for movement - up, down or both within the structure at the head of a partition. This deflection is created by live and dead loads on the floor or roof above. The partition below has to accommodate this defl..
Brand: Various
Model and Size: Standard Plasterboard Strips
Delivery Time: 2 - 5 working days
Cut to Size Standard Plasterboard Strips for Deflection Heads are used in plasterboard partitions to allow for movement - up, down or both within the structure at the head of a partition. This deflection is created by live and dead loads on the floor or roof above. The partition below has to accommo..