300x170mm JCW Fire and Acoustic Downlighter Cover
300x170mm JCW Fire and Acoustic Downlighter Cover
Guide Price: £58.90 (£70.68 inc VAT)
- Product Code: A1-1992
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 300x170mm
Our ratings on 26-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
300x170mm JCW Fire and Acoustic Downlighter Cover
300x170mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.
- Practical: The downlighter covers allow light fittings to operate without overheating.
- Resistant: the fire rating integrity of the ceiling (30-60 minutes of fire rating) is maintained.
- Flatten the cover.
- Fold the cover into quarters by folding it in half once, and then folding it in half again.
- Pass the folded cover through the aperture.
- Then fit the downlighter cover as per the downlighter manufacturers instructions - cables may be pushed through the vent slots in the cover.
- Check and ensure that there is a minimum of 20mm clearance between the downlighter and any insulation or acoustic filling in the void.
- Cut any excess.
- Please note that remote gearboxes and transformers must be situated outside of the downlighter cover.
JCW Acoustic Downlighter Covers and Cages pass British Standards tests on all types of ceilings, meeting Document B and E (acoustic equirements) of UK Buildings Regulations.
JCW Downlighter-Covers.pdf
Guide Price
Brand: JCW
Model and Size: 80x42x1800mm
Delivery Time: 2 - 3 working days
JCW Acoustic Batten 80T is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on timber subfloors. The JCW Acoustic Batten 80T offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an..
Guide Price: £6.97
£8.36 inc VAT
Guide Price
Brand: JCW
Model and Size: 600x600mm
Delivery Time: 2 - 3 working days
20mm JCW Fire Rated Luminaire Cover that provides maximum protection for ceilings where fire resistant ceiling tiles have been replaced with light fittings. The cover has been designed for ease of fitting. It is self locating and cannot be fitted incorrectly. It incorporates ventilation slots t..
Guide Price: £65.21
£78.25 inc VAT
Guide Price
Brand: JCW
Model and Size: 1000x30mm
Delivery Time: 2 - 3 working days
6mm JCW Impactalay Gripper Strip is an easy fitting device to prevent Impactlay plus from sliding and bunching. The JCW Impactalay plus must be installed alongside rubber JCW Perimeter Strips. It can be used on concrete, timber sub floors and stairs. Easily cut to size and simple to fit Provides a n..
Guide Price: £1.68
£2.02 inc VAT
Guide Price
Brand: JCW
Model and Size: 250x250mm
Delivery Time: 2 - 3 working days
250x250mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.CHARACTERISTICSPractical: The downlighter covers allow light fittings to operate without overheating.Resistant: the fire rating ..
Guide Price: £27.78
£33.34 inc VAT
Guide Price
Brand: JCW
Model and Size: 5000x600mm - 3.00m2
Delivery Time: 2 - 3 working days
52mm JCW Acoustic Quilt is a premium partition insulation roll for walls manufactured by sandwiching a 2mm acoustic barrier membrane between 2 layers of 25mm mineral wool. The sound barrier properties of the acoustic membrane are complemented and enhanced by the absorption qualities of the mineral w..
Guide Price: £74.49
£89.39 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x600mm - 0.72m2
Delivery Time: 3 - 5 weeks
22mm JCW Acoustic Cement Particle Board is a high density T&G overlay acoustic board suitable for floors and ceilings, specially designed to add concentrated mass. Used where there is a requirement for a high performance result in acoustic control and fire retardance. Manufactured from Portland ..
Guide Price: £44.65
£53.58 inc VAT