2mm JCW Acoustic Barrier Mat
2mm JCW Acoustic Barrier Mat
Guide Price: £63.61 (£76.33 inc VAT)
Price per m2: £10.60/m2 (£12.72 inc VAT)
15 or more £62.07 (£74.48 inc VAT)
20 or more £60.65 (£72.78 inc VAT)
- Product Code: A1-1958
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200x5000mm - 6.00m2
- Weight: 30.00kg
Our ratings on 22-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
2mm JCW Acoustic Barrier Mat
Width: 1200mm
Roll coverage: 6.00
Density: 2500kg/m3
Weight/m2: 5kg
Weight: 30kg
2mm JCW Acoustic Barrier Mat is an acoustic barrier matting that offers very good airborne performance across the frequency range. It is a very versatile and dense product that is used for a wide range of applications where airborne sound reduction is required. The most common installation areas are floors, walls & ceilings.
- Very quick and simple to install,
- Noticeable improvements will be gained when bonding barrier matting between two layers of Plasterboard on walls & ceilings or pinning on to stud work or joists prior to plasterboard fixing,
- Noticeable airborne improvement gain with minimal height loss when 2 barrier matting layers are laid on the floor in opposite directions,
- Ideal as a separating curtain wall between offices above walls,
- Perfect product for dampening steelwork, ducting and machinery casings etc,
- Can be loose laid,
- Can be partially or fully bonded to the sub-floor.
- New build
- Refurbishments
- Domestic upgrade
- On floors, walls & ceilings.
Floors CERTIFICATION
- Cut the first row of matting continuously across the room up to the wall edges and if possible beneath the skirting boards if fitted.
- The second and subsequent rows should either be tightly butt edged or overlapped by 25mm to ensure optimum airborne performance.
- As JCW Barrier Matting is an impervious product the best adhesive to use for an instant bond is either a Spray Contact Adhesive for partial bond or trowel/spreader applied Contact Adhesive if full bonding is required.
- Contact adhesive should be spread immediately once applied to the JCW Barrier Matting.
- The JCW Barrier Matting can be installed in continuous vertical lengths with vertical joints centrally between the studs or metal work.
- Cut the first vertical length and secure centrally between the studs or metal work using a few Clout Nails.
- Then fix the plasterboard/s over ensuring all plasterboard joints and/or minor gaps are sealed with JCW Acoustic Sealant/Mastic.
It has been independently tested in a UK Verified independent UKAS accredited laboratory. Pre-completion testing is not required.