27.5mm JCW Acoustic Silent Board - Acoustic Wall Liner
Guide Price
27.5mm JCW Acoustic Silent Board - Acoustic Wall Liner
Guide Price: £57.27 (£68.72 inc VAT)
Price per m2: £39.77/m2 (£47.73 inc VAT)
To add to cart change quantity to minimum of 25. If you need less, ask for a price or add to a quote list.
- Product Code: A1-1998
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200mm x 1200mm - 1.44m2
- Weight: 24.70kg
Our ratings on 23-04-2025:
4.7 out of 5 - Excellent
4.8 out of 5
27.5mm JCW Acoustic Silent Board - Acoustic Wall Liner
Length: 1200mm
Board Coverage: 1.44m2
Density: 624kg/m3
Weight/m2: 17.15kg
Weight: 24.7kg
27.5mm JCW Silent Board is an acoustic wall liner manufactured by laminating a 15mm acoustic resilient layer to a 12.5mm layer of acoustic grade plasterboard to drastically reduce sound transmission. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise up and down walls.
CHARACTERISTICS
- Easy as a quick to install,
- Solution directly onto walls,
- Only 27.5mm its half the thickness of other products,
- Simple to apply to lightweight wall structures or existing plasterboard so theres no studwork required,
- Ensures little compromise on living space without compromising high performance,
- Compliant with Part E building regulations,
- Could be used as a remedial solution for sound test failures,
- Fire retardant,
- 100% of the material has been recycled,
- Flexible, once installed the plasterboard surface is ready for any decorative finish.
APPLICATION
- New build
- Refurbishments
- Domestic upgrade
- On masonry or stud walls
INSTALLATION
- All skirting and coving is to be removed.
- Walls should be flat and/or prepared to accept the JCW Silent Boards.
- Start fitting from either right hand or left hand corner. Plan the bottom row to allow for cuts and staggered joints on all of the rows above.
- JCW Silent Boards must be isolated from the surrounding floor, ceiling and walls. Use JCW Rubber Isolation Strips between the JCW Silent Boards and the surrounding surfaces.
- Any minor gaps can be filled with JCW Acoustic Sealant.
- Alternatively, use 5mm spacers between the JCW Silent Boards and surrounding surfaces, then once the wall is completed, remove the spacers and fully the space with JCW Acoustic Sealant.
- JCW Silent Boards are mechanically fixed to the wall using 12 fixings per board; solid brick or block walls use tap in screw frame fixings. On Stud walls use suitable self-countersinking screws.
- Do not overtighten the screw fixings,
- Once the first JCW Silient Board is fitted in position, continue along the bottom row filling any gaps between the boards with JCW Acoustic Sealant.
- JCW Silent Boards can be plaster skimmed.
CERTIFICATION
JCW Acoustic Silent Board has been independently tested in a UK Verified independent UKAS accredited laboratory.
JCW Silent-Board.pdf
Guide Price
Brand: JCW
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 2 - 3 working days
37mm JCW Acoustic Deck 37C is a 15mm resilient acoustic layer laminated to a 22mm T&G chipboard, designed for fitting direct to joist. Acoustic Deck 37 is specially designed for direct to joist fitment after existing timber floor has been removed. After removing existing timber floors, there is no n..
Guide Price: £66.50
£79.80 inc VAT
Guide Price
Brand: JCW
Model and Size: 1000x30mm
Delivery Time: 2 - 3 working days
9mm JCW Impactalay Gripper Strip is an easy fitting device to prevent Impactalay plus from sliding and bunching. The JCW Impactalay plus must be installed alongside rubber JCW Perimeter Strips. It can be used on concrete, timber sub floors and stairs. Easily cut to size and simple to fit Provides a ..
Guide Price: £1.68
£2.02 inc VAT
Guide Price
Brand: JCW
Model and Size: 80x42x1800mm
Delivery Time: 5 - 7 days
JCW Acoustic Batten 80C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 80C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with ..
Guide Price: £5.99
£7.19 inc VAT
Guide Price
Brand: JCW
Model and Size: Single x 47mm deep
Delivery Time: 2 - 3 working days
Single x 47mm deep JCW Fire and Acoustic Socket Box Insert is an acoustic insulation system for wall sockets to eliminate the transfer of sound through walls. Suitable for both new installations and refurbishments, available for both single, double and twin-gang applications. Fabricated from Class O..
Guide Price: £4.31
£5.17 inc VAT
Guide Price
Brand: JCW
Model and Size: 5mm x 75mm - Free Delivery
Delivery Time: 2 - 3 working days
5mm x 75mm x 50m JCW Perimeter Edging Strip is a foam strip to isolate acoustic flooring from perimeter walls and maintain the acoustic integrity of the structure. For use with Acoustic Battens, Acoustic Cradles and Acoustic Decks.APPLICATIONTo isolate acoustic flooring from perimeter walls CERTIFIC..
Guide Price: £22.28
£26.74 inc VAT
Guide Price
Brand: JCW
Model and Size: JCW Cradle Packer
Delivery Time: 2 - 3 working days
2mm JCW Acoustic Cradle Packer also called a 2mm Packing Shims is an integral part of the JCW Acoustic Cradle and Batten System that can be used on both timber and concrete subfloors. This system is ideal for levelling uneven subfloors and can accommodate levels varying from 55mm to in excess of 300..
Guide Price: £19.88
£23.86 inc VAT