225mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20




225mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20
Price: £4.80 (£5.76 inc VAT)
- Product Code: A1-5339
- Delivery Time: 2 - 3 working days
- Brand: Ancon (Tech. support: : +44(0)1142381238)
- Model and Size: 225mm
Our ratings on 31-03-2025:

4.7 out of 5 - Excellent


4.8 out of 5
This product has a minimum quantity of 27
Show other sizes
225mm Ancon Staifix HRT4 Stainless Steel Wall Tie - Masonry Light Duty Tie - Type 4 - pack of 20
Length: 225mm
Pack Quantity: 20
Cavity width: 76-100mm
225mm Ancon Staifix HRT4 Wall Tie is a low conductivity stainless steel masonry wall tie for use in domestic houses up to 10 metres in height. Wall ties should be pressed down in fresh mortar. They should be surrounded by mortar and they should be installed as the inner leaf is constructed and not simply pushed into a joint. Ideally, ties should be installed level or with a slight fall to the outer leaf. Ancon Staifix HRT4 wall tie should be positioned centrally as a drip will normally be near the centre of the open section of a partial fill cavity.
CHARACTERISTICS
- Masonry-to-masonry wall tie,
- For use in domestic houses up to 10 metres in height
- Light duty type 4 wall tie,
- Meets the performance requirement of Approved Document E for use in external masonry walls,
- Suitable for cavities of 76-100mm,
Brand: Ancon
Model and Size: 225mm
Delivery Time: 3 - 5 days
225mm Ancon PPS Movement Tie with Debonding Sleeve is designed to accommodate movement in masonry structures while maintaining structural integrity. This innovative tie features a debonding sleeve that allows for controlled movement between the inner and outer leaves of a wall, effectively reducing ..
Brand: Ancon
Model and Size: 225mm
Delivery Time: 2 - 3 working days
225mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 415mm
Delivery Time: 2 - 3 working days
415mm Ancon Teplo-R Wall Tie is a remedial wall tie is an ultra-low thermal conductivity wall tie manufactured from basalt fibres set in a resin matrix. It minimises heat loss across an insulated cavity, improving the energy efficiency of a masonry cavity wall. It is a plain-ended basalt fibre wall ..
Brand: Ancon
Model and Size: 180mm - BFL-7
Delivery Time: 1-3 working days
180mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..
Brand: Ancon
Model and Size: 175mm
Delivery Time: 2 - 3 working days
175mm AC 31 Wall Tie is a masonry remedial wall tie for tying together two leaves of solid walls, where bricks are removed then replaced in the outer leaf. The wavy end is resin-bonded into the inner leaf in a 10mm Ø hole. The triangular end sits in the bed joint. Ancon AC 31 wall tie is s..
Brand: Ancon
Model and Size: 205mm - BFL-7
Delivery Time: 1-3 working days
205mm Ancon Teplo-BFL-7 Wall Tie is ideal where a low thermal conductivity restraint fixing is required between a masonry outer leaf and an in-situ structure. This ultra-low thermal conductivity wall tie can be fixed to concrete, masonry, steel and timber substrates. Ancon Teplo-BFL-5 Wall Tie has a..