20mm Xtratherm PIR Rigid Insulation Board

Guide Price
20mm Xtratherm PIR Rigid Insulation Board
Guide Price: £15.62 (£18.74 inc VAT)
Price per m2: £5.42/m2 (£6.51 inc VAT)
- Product Code: A1-90
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: Thin-R - 2400 x 1200 - 2.88m2
- Weight: 1.73kg
Our ratings on 17-04-2025:

4.7 out of 5 - Excellent


4.8 out of 5
20mm Xtratherm PIR Rigid Insulation Board
Width: 1200mm
Length: 2400mm
Density: 30kg/m3
Weight: 1.73kg
Thermal Conductivity: 0.022W/mK
R-Value: 0.91m2K/W
Compressive Strength: 140kPa
Xtratherm Thin-R is a foil-faced Polyisocyanurate (PIR) insulation board formed by a blowing process that generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-R superb insulating capability. Long-term performance is ensured by the foil facings, which are gas tight.
Characteristics
- The thermal conductivity of Xtratherm Thin-R is among the lowest for commonly available insulation boards.
- Xtratherm Thin-R boards are manufactured to strict dimensional tolerances, enabling the boards to be fitted tightly together. This reduces air leakage through the construction and associated heat losses through convection.
- Xtratherm Thin-R contains gas-tight aluminium facings that form a low emissivity surface which, when facing a cavity, reduces the heat loss through radiation, cutting the overall rate of heat loss.
- Xtratherm Thin-R's excellent lambda value and therefore low thickness allow constructions to be thinner than they would be with other insulation materials.
- With the excellent thickness to performance ratio (R-value) of Xtratherm Thin-R, less material is required to achieve the best performance levels asked for in the new building regulations.
Application
Xtratherm Thin-R insulation board is suitable for use in:
- Floors
- Walls
- Roofs
Virtually all building elements can be insulated with PIR:
- Concrete slab
- Beam and block timber floors
- Masonry or timber-framed walls
- Flat and pitched roofs
Certification
- Xtratherm Thin-R is manufactured under an ISO9001 assured quality system.
- Xtratherm Thin-R is manufactured using Pentane as the blowing agent. Pentane is CFC/HCFC free with zero ozone depletion potential and a Global Warming Potential less than 0.01.
Brand: Xtratherm
Model and Size: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
30mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capabi..
Guide Price: £17.47
£20.96 inc VAT
Brand: Xtratherm
Model and Size: 1200mm x 1200mm - 4.32m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 120mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £108.78
£130.54 inc VAT
Brand: Xtratherm
Model and Size: 1200x450mm - 2.16m2
Delivery Time: 2 - 3 working days
80mm Xtratherm Safe-R SR/CW Phenolic foam board is a superior performance rigid partial fill cavity insulation board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/CW is faced with low emissivity aluminium facings both sides, a..
Brand: Xtratherm
Model and Size: 1200x2400mm - 5.76m2
Delivery Time: 1-3 working days
150mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performa..
Brand: Xtratherm
Model and Size: Thin-R - 2400 x 1200 - 2.88m2
Delivery Time: 1-3 working days
100mm Xtratherm Thin-r is a foil faced Polyisocyanurate (PIR) insulation board formed by a blowing process which generates rigid foam composed of fine cells filled with Pentane blowing agent trapped within the foam. Pentane has very good insulating properties and gives Thin-r superb insulating capab..
Guide Price: £37.87
£45.44 inc VAT
Brand: Xtratherm
Model and Size: 2400x1200 - 2.88m2
Delivery Time: 1-3 working days
Xtratherm Plydeck is a composite insulated panel consisting of an 100mm Xtratherm Polyisocyanurate core with a composite foil face, bonded to 9mm OSB board. This advanced panel offers both thermal insulation and decking capabilities in a single application.
Application
Xtratherm Plydec..
Guide Price: £61.98
£74.38 inc VAT