Knauf Hydro Flex Liquid Foil Waterproof Tanking Membrane - 15 Kg

Guide Price
Knauf Hydro Flex Liquid Foil Waterproof Tanking Membrane - 15 Kg
Guide Price: £77.00 (£92.40 inc VAT)
- Product Code: A1-4787
- Delivery Time: In Stock 1-2 working days
- Brand: Knauf (Tech. support: 08000304135)
- Model and Size: 15kg
- Weight: 15.00kg
Our ratings on 25-04-2025:

4.7 out of 5 - Excellent


4.8 out of 5
Knauf Hydro Flex Liquid Foil Waterproof Tanking Membrane - 15 Kg
Weight: 15kg
Knauf Hydro Flex Liquid Foil Waterproof Tanking Membrane is a one-component, ready-to-use highly plastic liquid waterproof tanking membrane for wall and floor surfaces under ceramic tiles. Although the tiles themselves are impermeable to water, the joints between them are not 100% waterproof. Even with very precise grouting, there are micro-gaps between the tiles through which moisture can penetrate. This is a simple path to the growth of fungi and mold. To avoid this, it is best to insulate the surface under the tiles with Knauf Hydro Flex liquid foil. The foil creates a waterproof layer that acts as a barrier to moisture and prevents it from penetrating the substrate.
CHARACTERISTICS
- Waterproof - protects the substrate,
- Ready to use,
- Easy to apply,
- For use inside buildings,
- No primer required, Crack-bridging capacity 0.75 mm,
- Coating thickness 0.3 mm,
- Minimum thickness of the finished coating, 1 mm (two layers),
- One layer drying time, 3 hours,
- The possibility of laying tiles after 12 hours.
INSTALLATION
- The substrate must be dry, clean and dust-free,
- Choose the wet zones, such as the entire floor surface, areas around the shower tray, washbasins or bathtubs,
- Prime the substrate; dilute the Hydro Flex in a ratio 1:4 with water, prime the wet zones with a brush or roller,
- Let the primed surface to dry for 3 hours,
- Fix sealing tapes to wall-floor joints,
- Tape overlap must be at least 2 cm,
- Fix internal/external corner sealing stripes where necessary,
- Fix sealing tapes around pipes and other protruding objects and holes,
- Apply Hydro Flex straight from the tub to the surface of the wet zones,
- After laying tiles on the walls, apply Hydro Flex liquid foil waterproofing to the floor. Repeat all the activities when insulating the walls. First, prime the diluted liquid foil, three hours after priming, apply the first layer of proper waterproofing, wait 3 hours for the foil to dry and finally apply the second layer.
Brand: Knauf
Model and Size: 4.5m x 1.4m - 5.13m2
Delivery Time: 3 - 5 days
90mm Knauf Earthwool FrameTherm Roll is a lightweight, flexible, resilient and non-combustible glass mineral wool quilt, used for friction fitting between timber studs and rafters. The rolls are 1140mm wide and ready cut to produce 3 rolls in 380mm widths. It is specifically designed for friction fi..
Brand: Knauf
Model and Size: 30kg
Delivery Time: 3 - 5 days
30kg Knauf MP 75 L is a factory prepared, basic, dry plaster mortar for hand or machine-applied single-layer gypsum plasters for internal walls. Knauf MP 75 L can be used on all kinds of mineral substrates from the basement to the roof in areas, where maximum humidity is less than 70%, including kit..
£23.95
£28.74 inc VAT
Brand: Knauf
Model and Size: 1200x455mm - 3.28m2
Delivery Time: 3 - 5 days
75mm Knauf DriTherm 32 Ultimate Cavity Slab is a high-performance insulation product specifically designed for use in external full-fill masonry cavity walls. These water-repellent glass mineral wool slabs provide exceptional thermal performance, making them an ideal choice for enhancing energy effi..
Guide Price: £35.81
£42.97 inc VAT
Brand: Knauf
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1 - 2 days
12.5mm Knauf Aquapanel Exterior Cement Board provides a solid, dry base that can withstand the extreme weathering effects of wind, rain, and snow. It makes an ideal substrate for directly applied render finishes and can be used for exterior walls in ventilated systems, exterior ceilings, and soffits..
Guide Price: £74.34
£89.21 inc VAT
Brand: Knauf
Model and Size: 1200mm x 600mm - 2.88m2
Delivery Time: 2 - 5 working days
140mm Knauf Omnifit 35 Glass Wool Slabs are rigid multipurpose, flexible, non-combustible glass mineral wool slab that is designed for friction fitting installation at 600mm spacings. It has excellent thermal, acoustic, and fire resistance. The sound absorption qualities of Knauf Omnifit slabs are r..
Guide Price: £33.50
£40.20 inc VAT
Brand: Knauf
Model and Size: 170mm - 8.01m2
Delivery Time: 1 - 2 days
170mm Knauf Loft Roll 44 is a high-performance, flexible low density glass mineral wool insulation product designed for use in loft and attic spaces. It is made from glass mineral wool, providing excellent thermal and acoustic insulation properties. The 'combi-cut' feature means the rolls are 1140mm..
£33.00
£39.60 inc VAT