12mm JCW ImpactaLay Acoustic Mat
12mm JCW ImpactaLay Acoustic Mat
Guide Price: £36.31 (£43.57 inc VAT)
Price per m2: £30.26/m2 (£36.31 inc VAT)
To add to cart change quantity to minimum of 75. If you need less, ask for a price or add to a quote list.
150 or more £33.25 (£39.90 inc VAT)
225 or more £31.90 (£38.28 inc VAT)
- Product Code: A1-1955
- Delivery Time: 2 - 3 working days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 1200x1000mm - 1.20m2
- Weight: 9.60kg
Our ratings on 23-12-2024:
4.7 out of 5 - Excellent
4.8 out of 5
12mm JCW ImpactaLay Acoustic Mat
Width: 1000mm
Length: 1200mm
Mat coverage: 1.20
Density: 667kg/m3
Weight/m2: 8kg
Weight: 9.6kg
12mm JCW ImpactaLay Acoustic Mat is a remarkably cost-effective and one of the quickest and most effective acoustic solutions on the market. It increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors or false walls. JCW ImpactaLay Acoustic Mat not only increases minimum ceiling height, but it also reduces labour and materials costs considerably. It is made from an acoustic foam, which does not harden or crumble over time.
- For concrete floors,
- Cost-effective,
- Very quick and simple to install,
- Can be loose laid with taped joints and fully bonded to the sub-floor
- Reduces construction height,
- Suitable for all final floor finishes.
- New build
- Refurbishments
- Domestic upgrade
- Can be bonded to concrete floors
- JCW ImpactaLay can be laid under all final floor finishes, either laid loose or bonded to the floor with an JCW ImpactaLay adhesive.
- Ensure the floor is clean and dry when bonding.
- Always ensure the ImpactaLay sits tightly against the wall or skirting board to prevent flanking of airborne noise.
- Carpets can be layed straight onto the ImpactaLay, and can be glued or fastened by use of gripper rods, however where this is the case a separate perimeter strip is required. It is recommended bonding a layer of 6mm plywood to the JCW Impacta Acoustic Underlay before laying the laminated floor or before laying the vinyl floor.
- NOTE: Ceramic & stone tiling are not recommended due to the compressive nature of JCW Impactalay.
It has been independently tested in a UK Verified independent UKAS accredited laboratory. Pre-completion testing is not required.