Menu
Menu
Your Cart

125mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)

125mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 3)

Width: 1200mm
Length: 2400mm
Pack Coverage: 8.64m2
Pack Quantity: 3
Density: 32kg/m3
Weight/m2: 4kg
Weight: 34.56kg
Thermal Conductivity: 0.022W/mK
R-Value: 5.68m2K/W
Compressive Strength: 150kPa

125mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.

Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.

APPLICATION
  • Flat roof below single ply mechanically fixed roof membranes

CHARACTERISTICS
  • Superior performance PIR foam core,
  • Vapour-tight aluminium facings on both sides,
  • Effective thermal,
  • Contributes to limit the risk of condensation,
  • Will have life as long as the roof waterproof covering,
  • For new build or refurbishment,
  • Rot proof and will remain effective for the life span of the building,
  • Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION

    90mm Thin-R XT/CW Partial Fill Cavity Insulation Xtratherm (pack of 4)
    Guide Price
    Brand: Xtratherm Model and Size: 1200x450mm - 2.16m2
    Delivery Time: 2 - 4 days
    Xtratherm ThinR XT/CW Partial Fill Cavity Wall Insulation is the best solution when designers or regulations demand additional thermal insulation in external masonry walls, without a substantial increase in the width of the cavity. Xtratherm Thin-R boards achieve high standards of insulation wh..
    Guide Price: £35.47
    £42.56 inc VAT
    Get Best Price
    Brand: Xtratherm Model and Size: 2400x1200 - 2.88m2
    Delivery Time: 1-3 working days
    96mm Xtratherm FR/TP Ply is a composite insulated panel of 90mm Xtratherm Polyisocyanurate core with a composite foil face, bonded to 6mm WBP grade plywood board. Xtratherm FR/TP Ply is designed to provide high levels of thermal insulation and decking in one operation for new and refurbishment flat ..
    Get Best Price
    Brand: Xtratherm Model and Size: 2400x1200mm - 11.52m2
    Delivery Time: 1-3 working days
    90mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use bel..
    Get Best Price
    110mm Xtratherm Flat Roof Board FR-MG (pack of 4)
    Guide Price
    Brand: Xtratherm Model and Size: 1200x600mm - 2.88m2
    Delivery Time: 3 - 5 days
    Xtratherm FR-MG 110mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
    Guide Price: £75.64
    £90.77 inc VAT
    Get Best Price
    80mm Flat Roof PIR Insulation Board Xtratherm FR-BGM (pack of 6)
    Guide Price
    Brand: Xtratherm Model and Size: 1200x600mm - 4.32m2
    Delivery Time: 3 - 5 days
    80mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mecha..
    Guide Price: £90.18
    £108.22 inc VAT
    Get Best Price
    90mm Thin-R CT/PIR Cavity Therm Full Fill Insulation Xtratherm (pack of 4)
    Guide Price
    Brand: Xtratherm Model and Size: CT/PIR 1200x450 - 2.16m2
    Delivery Time: 1-3 working days
    90mm Xtratherm CavityTherm wall insulation board is a high performance composite board of enhanced PIR core with a lambda value of 0.021W/mK. The boards have gas tight facings with one face bonded to a profiled HIPS skin during manufacture to provide a drainage plane. CavityTherms unique engine..
    Guide Price: £79.47
    £95.36 inc VAT
    Get Best Price
    This product is listed in the following categories and systems (click to show).