10kg Mapei Ultrabond P902 2k - Two-component Epoxy-Polyurethane Adhesive for Wooden Flooring
10kg Mapei Ultrabond P902 2k - Two-component Epoxy-Polyurethane Adhesive for Wooden Flooring
Guide Price: £58.00 (£69.60 inc VAT)
Price per m2: £5.80/m2 (£6.96 inc VAT)
- Product Code: A1-3034
- Delivery Time: 3 - 5 days
- Brand: Mapei
- Model and Size: 10kg
- Weight: 10.00kg
Our ratings on 23-12-2024:
4.7 out of 5 - Excellent
4.8 out of 5
10kg Mapei Ultrabond P902 2k - Two-component Epoxy-Polyurethane Adhesive for Wooden Flooring
Density: 1600kg/m3
Weight: 10kg
10kg Mapei Ultrabond P902 2k is a two-component Epoxy-Polyurethane Adhesive for bonding wooden planks and all types of wood on anhydrite screeds, cementitious screeds, ceramic tiles, marble, terrazzo tiles, etc. and metallic sheets. By mixing the two components - an epoxy-polyurethane polymer and a hardener in paste form - together, a uniform coloured product is obtained that can be easily applied with a notched trowel. After hardening (approximately 24 hours at room temperature) Mapei Ultrabond P902 2K becomes a strong film with high bonding strength to all types of substrates, including those that are non-porous. Suitable also for underfloor heating systems.
CHARACTERISTICS
- Components: an epoxy-polyurethane polymer and a hardener in paste form.
- Easy to mix,
- Easy to apply with a notched trowel,
- Hardening time - approximately 24 hours at room temperature,
- High bonding strength to all types of substrates, including those that are non-porous.
APPLICATION
- The two components of Ultrabond P902 2K are packed in plastic containers and are already pre-measured: component A : 9kg, component B : 1kg
- Mix with a low speed stirrer until a uniform colour is obtained.
- Setting time and pot life strictly depends on the ambient temperature. During the summer time the product hardens quickly while in winter it takes longer. At temperatures below +10C the reaction is too slow, therefore it is not recommended to lay wooden flooring.
- The wood planks should stored dry, insulated from the ground and not subject to vapour condensation.
- Before installing check that the moisture content of the wood is correct.
- Apply pressure on the wood to make sure the adhesive wets the back of the planks.
- Avoid squeezing the adhesive in the joints between the planks.
- Never bond the edges of wood.
- The floors can be used for light foot traffic after approximately 24 hours.
- Polishing can be carried out after 3 days.
- It is recommended to wait 7-10 days so the wooden floor to settle better.