102.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (90mm PIR Insulation bonded to 12.5mm Plasterboard)
102.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (90mm PIR Insulation bonded to 12.5mm Plasterboard)
Guide Price: £99.79 (£119.75 inc VAT)
Price per m2: £34.65/m2 (£41.58 inc VAT)
- Product Code: A1-1857
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: 1200x2400 - 2.88m2
- Weight: 32.28kg
Due to nationwide shortage of PIR insulation lead time may be longer for this product.
Our ratings on 26-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
102.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF - Mech Fix (90mm PIR Insulation bonded to 12.5mm Plasterboard)
Width: 1200mm
Length: 2400mm
Density: 109.4kg/m3
Weight/m2: 11.21kg
Weight: 32.28kg
Thermal Conductivity: 0.022W/mK
R-Value: 4.09m2K/W
Compressive Strength: 140kPa
CHARACTERISTICS
- High Thermal Performance
- Certified Thermal Conductivity as low as 0.022W/mK
- Integral Vapour Control Layer
- 12.5mm tapered edge plasterboard. (You can also order square edge plasterboard.)
- Low Emissivity Foil Facings
- Energy Saving Trust Approved Product
- HCFC/CFC Free, GWP <5
- BRE Green Guide A+ Rated
- Non-deleterious material
- Closed cell structure – moisture resistant
- Easy to Install
- Masonry walls
- Sloped rafters
- Ceilings
INSTALLATION
- Mechanical Fixing XT/TL-MF Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the XT/TL-MF Thermal Liner into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge. The fixings (thermally broken) should penetrate at least 25mm into the batten.
- Installation must be in accordance with good dry lining practice. BS 8212:1988 should be considered, careful setting out and planning is essential, fill any gaps with foam filler.
CERTIFICATION
- This product is manufactured in accordance with BS/IS EN 13165:2008
- BS EN ISO 9001 Quality Management Systems
- BS EN ISO 14001 Environmental Management Systems
- BS OHSAS 18001 Health & Safety Management Systems
- Energy Savings Trust Recommended Product
Xtratherm Thin-R-XT-TL-MF.pdf
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 4.32m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the deck. Th..
Guide Price: £85.84
£103.01 inc VAT
Brand: Xtratherm
Model and Size: 2400x1200mm - 17.28m2
Delivery Time: 2 - 3 working days
50mm Xtratherm Safe-R SR/UF Phenolic foam is a superior performance rigid underfloor insulation with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR is faced with low emissivity aluminium facings both sides, and has a thermal conduct..
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 2.16m2
Delivery Time: 1-3 working days
150mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mech..
Guide Price: £83.97
£100.76 inc VAT
Brand: Xtratherm
Model and Size: 2400x1200 - 2.88m2
Delivery Time: 1-3 working days
56mm Xtratherm FR/TP Ply is a composite insulated panel of 50mm Xtratherm Polyisocyanurate core with a composite foil face, bonded to 6mm WBP grade plywood board. Xtratherm FR/TP Ply is designed to provide high levels of thermal insulation and decking in one operation for new and refurbishment flat ..
Brand: Xtratherm
Model and Size: 2400x1200mm - 11.52m2
Delivery Time: 2 - 3 working days
75mm Xtratherm Safe-R SR/ST Phenolic foam is a superior performance rigid insulation soffit board with enhanced fire performance, consisting of a Class O phenolic foam core with negligible smoke obscuration. Safe-R SR/ST is faced with low emissivity aluminium facings both sides, and has a thermal co..
Brand: Xtratherm
Model and Size: 1200x2400mm - 5.76m2
Delivery Time: 1-3 working days
150mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performa..