100mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 4)
100mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 4)
- Product Code: A1-4619
- Delivery Time: 1-3 working days
- Brand: Xtratherm (Tech. support: 03712221055)
- Model and Size: 2400x1200mm - 11.52m2
- Weight: 36.86kg
Our ratings on 26-11-2024:
4.7 out of 5 - Excellent
4.8 out of 5
100mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board (pack of 4)
Width: 1200mm
Length: 2400mm
Pack Coverage: 11.52m2
Pack Quantity: 4
Density: 32kg/m3
Weight/m2: 3.2kg
Weight: 36.86kg
Thermal Conductivity: 0.022W/mK
R-Value: 4.55m2K/W
Compressive Strength: 150kPa
100mm Xtratherm Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Suitable for use below single ply mechanically fixed roof membranes.
Note: not suitable for applications with built-up bitumen based roofing or mastic asphalt systems.
APPLICATION
- Flat roof below single ply mechanically fixed roof membranes
CHARACTERISTICS
- Superior performance PIR foam core,
- Vapour-tight aluminium facings on both sides,
- Effective thermal,
- Contributes to limit the risk of condensation,
- Will have life as long as the roof waterproof covering,
- For new build or refurbishment,
- Rot proof and will remain effective for the life span of the building,
- Can be readily cut using a sharp knife or fine toothed saw
CERTIFICATION
Xtratherm_flat_roofing_FR_ALU_Datasheet.pdf
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 2.16m2
Delivery Time: 3 - 5 days
Xtratherm FR-MG 120mm is a mineral coated glass faced board. Xtratherm XT/FR MG boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the direction of the substrate and all edges must be fully supported by the de..
Guide Price: £62.32
£74.78 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x600mm - 3.6m2
Delivery Time: 1-3 working days
100mm Xtratherm FR-BGM is a PIR insulation board that is faced with a fleece finished bitumen/glass facers and is suitable for use below partially bonded bitumen based built up roofing systems. FR-BGM is suitable to apply torch on felt directly on the insulation. FR-BGM can also be used in mech..
Guide Price: £94.04
£112.85 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
67.5mm Xtratherm XT/TL Thermal Liner Dot and Dab (55mm PIR Insulation bonded to 12.5mm Plasterboard)
67.5mm Xtratherm XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 55mm Xtratherm PIR core faced with composite kraft paper bonded to 12.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its closed ce..
Guide Price: £78.97
£94.76 inc VAT
Guide Price
Brand: Xtratherm
Model and Size: 1200x450mm - 4.86m2
Delivery Time: 2 - 4 days
Xtratherm ThinR XT/CW Partial Fill Cavity Wall Insulation is the best solution when designers or regulations demand additional thermal insulation in external masonry walls, without a substantial increase in the width of the cavity. Xtratherm Thin-R boards achieve high standards of insulation wh..
Guide Price: £65.30
£78.36 inc VAT
Brand: Xtratherm
Model and Size: 1200x2400mm - 11.52m2
Delivery Time: 1-3 working days
75mm Xtratherm Thin-R Hyfloor XT/HYF is a high performance floor Insulation board with superior thickness to performance ratio allowing the lower targets required under the new Building Regulations to be achieved with minimum thicknesses. Xtratherm Thin-R Hyfloor XT/HYF is a high performance fo..
Guide Price
Brand: Xtratherm
Model and Size: 1200x2400 (2.88m2)
Delivery Time: 1-3 working days
29.5mm Xtratherm Thin-R Thermal Liner XT/TL-MF, this innovative composite insulated panel combines a 20mm Xtratherm Polyiso (PIR) core with foil faces, bonded to 9.5mm tapered edge plasterboard for secure mechanical fixing to internal walls. Ideal for use in new build and refurbishment projects, XT/..
Guide Price: £53.52
£64.22 inc VAT