37.5mm Unilin Safe-R SR/TB-MF (25mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 12)
Guide Price
37.5mm Unilin Safe-R SR/TB-MF (25mm Phenolic Core and 12.5mm Plasterboard) - Mechanical Fixing (pack of 12)
Guide Price: £665.07 (£798.08 inc VAT)
Price per m2: £19.24/m2 (£23.09 inc VAT)
2 or more £643.76 (£772.51 inc VAT)
4 or more £622.26 (£746.71 inc VAT)
5 or more £600.77 (£720.92 inc VAT)
- Product Code: A1-4883
- Delivery Time: 2 - 3 working days
- Brand: Unilin (prev. Xtratherm)
- Model and Size: 2400x1200 - 34.56m2
Our ratings on 02-07-2024:
4.7 out of 5 - Excellent
4.8 out of 5
37.5mm Unilin Safe-R SR/TB-MF (25mm Phenolic Core + 12.5mm Plasterboard) - Mechanical Fixing (pack of 12)
Length: 2400mm
Width: 1200mm
Thickness: 37.5mm
Pack Quantity: 12
Board Coverage: 2.88m2
Pack Coverage: 34.56m2
Thermal Conductivity: 0.023W/mK
R-Value: 1.15m2K/W
37.5mm Unilin Safe-R SR/TB-MF is a composite insulated panel of 25mm Phenolic core with a composite foil facing bonded to a 12.5mm tapered edge plasterboard for internal applications, mechanically fixed. Unilin Safe-R SR/TB-MF is designed to provide high levels of thermal insulation and dry lining in one operation for masonry walls. Unilin Safe-R SR/TB-MF incorporates an integral vapour control layer, which helps to reduce the risk of condensation. It can be used as a composite plasterboard for internal walls, sloped roofs and ceilings.
Note: This product was formerly known as 37.5mm Xtratherm Safe-R Thermal Liner SR/TB-MF
CHARACTERISTICS
- Superior performance phenolic foam,
- Low thermal conductivity,
- Effective thermal and fire performance,
- Can be readily cut using a fine toothed saw,
- Rot proof and will remain effective for the life span of the building,
APPLICATION
- Internal wall drylining for new build or refurbishment,
- For internal walls, sloped roofs and ceilings.
INSTALLATION
- Fix a pre-treated timber batten horizontally at ceiling level and another 20mm above the finished floor level.
- Fix vertical battens at max 600mm centres.
- Ensure battens are wide enough to offer 20mm support to all four edges of the plasterboard.
- Pack battens if necessary to level the wall.
- Trim all openings and service penetrations with timber battens.
- Insulation should be cut back to accommodate an adjoining panel at external corners.
- Lift the SR/TB-MF into position using wedges on the floor.
- Screws should be fixed to the timber batten at 150mm centres, at least 12mm in from the board edge.
- The fixings should penetrate at least 25mm into the batten.
- Installation must be in accordance BS 8212:1988.
- Fill any gaps with foam filler.
CERTIFICATION
Unilin Safe-R SR/TB is manufactured to EN ISO 13166 under - Quality Systems approved to EN ISO 9001, Quality Management,
- EN ISO 14001 Environmental Management,
- ISO 45001 Occupational Health and Safety Management System.
Unilin_SR_TB-MF_datasheet.pdf
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200mm x 2400mm - 2.88m2
Delivery Time: 1-3 working days
50.5mm Unilin XT/TL Thermal Liner Dot and Dab Insulated Plasterboard is a high performance rigid insulation board made from 38mm Unilin PIR core faced with composite kraft paper bonded to 12.5mm plasterboard, specially designed for internal walls dry lining and insulation, due to its close..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400x1200mm - 20.16m2
Delivery Time: 1-3 working days
40mm Unilin Thin-R FR/ALU Flat Roof PIR Insulation Board is a flat roof insulation with enhanced vapour resistant performance. Unilin Thin-R FR/ALU board is faced with low emissivity aluminium facings both sides. Rot proof and will remain effective for the life span of the building. Unilin Thin..
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
62.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 50mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining i..
Guide Price: £63.56
£76.27 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x2400 - 2.88m2
Delivery Time: 1-3 working days
37.5mm Unilin Thin-R Thermal Liner XT/TL-MF is a composite insulated panel of 25mm Unilin PIR core with foil faces bonded to 12.5mm tapered edge plasterboard for mechanically fixing to internal walls. Unilin XT/TL-MF is designed to provide high levels of thermal insulation and dry lining i..
Guide Price: £49.93
£59.92 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 2400mm x 1200mm - 2.88m2
Delivery Time: 1-3 working days
100mm Unilin Thin-r XT/TF has a core of polyisocyanurate (PIR) bonded to low emissivity textured aluminium foil facings for use in timber framed walls. Unilin XT/TF board offers excellent insulation performance with excellent thermal conductivity. Unilin XT/TF is CFC & HCFC free and is manu..
Guide Price: £36.55
£43.86 inc VAT
Guide Price
Brand: Unilin (prev. Xtratherm)
Model and Size: 1200x450mm - 4.86m2
Delivery Time: 1-3 working days
50mm Unilin XtroLiner XO/CW board has a tongue and groove core of modified polyisocyanurate (PIR) bonded to low emissivity aluminium foil facings offering excellent insulation performance with thermal conductivity. Unilin XtroLiner XO/CW board reduces the junctions prone to thermal bridging imp..