Helical Bar Grout HG3 - 3 Litres
Helical Bar Grout HG3 - 3 Litres
- Product Code: A1-3573
- Delivery Time: 1 - 2 days
- Brand: Teco
- Model and Size: 3L
Our ratings on 02-07-2024:
4.7 out of 5 - Excellent
4.8 out of 5
Helical Bar Grout HG3 - 3 Litres
Volume: 3litres
Helical Bar Grout is a high performance, non-shrink, non-gassing, thixotropic, cement based grout, suitable for injection into masonry voids. Helical Bar Grout is suitable for bonding metal components into substrates, such as concrete, brick, blocks or stone. Due to its thixotropic ability, the Helical Bar Grout would flow sufficiently to form a uniform layer, then resist further flow, thereby preventing sagging on a vertical surface. This way, the grout would completely fills all voids into which it is injected and develops its compressive strength rapidly.
- Helical Grout is packed in tubs containing individually packed dry powder and liquid.
- 3L tub would cover 10m.
INSTALLATION
- It is important to make the correct size of hole to ensure a good bond.
- A minimum clearance of 2mm all round should be allowed, e.g 10mm hole for 6mm helical bar,
- A greater clearance being required with more absorbent substrate.
- The hole should be vacuumed and flushed out with clean water.
- Mix the Helical Grout by adding half of the powder to all of the liquid in the tub provided.
- Mix until blended.
- Add the remaining powder and mix thoroughly, preferably using a powered mixing paddle for a minimum of two minutes.
- Pour the mixture into the cartridge of the pointing gun and inject into the hole or slot in a continuous operation.
Guide Price
Brand: Teco
Model and Size: 900mm - 50m
Delivery Time: 1 - 2 days
900mm Galvanised Hex Mesh consists of a pattern of woven flat hexagonal shaped wires used for supporting rock wool, glass wool insulation, roof underlays, foil insulation. This mesh is easy to install and can be used on timber and steel framing. This Hex Mesh can also be used for floor screed reinfo..
Brand: Teco
Model and Size: WT250 - free delivery
Delivery Time: 2 - 3 working days
Housing Tie - Light Duty Wall Tie suitable for box form domestic dwellings with leaves of similar thickness up to 10m high.Tested as type A (sound)Tested as Type 4 (strength) to BS EN 845-1BBA CertifiedStainless SteelA number of key factors must be taken into consideration to conform to building reg..
£66.49
£79.79 inc VAT
Guide Price
Brand: Teco
Model and Size: 15mm - Abutting
Delivery Time: 1 - 2 days
15mm Galvanised Steel Drywall Feature Bead - Abutting is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes.&..
Brand: Teco
Model and Size: 250
Delivery Time: 1 - 2 days
For use with standard wall ties in partial fill cavity wall insulating, suitable for PIR rigid insulation boards or wool slabs (batts).These clips hold insulation in place and help to keep the rest of the cavity space clear.Improve the effective thickness of a wall under loadMaintain the moisture br..
£25.31
£30.37 inc VAT
Guide Price
Brand: Teco
Model and Size: 15mm - 3m
Delivery Time: 1 - 2 days
15mm Galvanised Steel Plasterboard Edge Bead that is used to reinforce plasterboard edges by enclosing them in a rotective steel enclosure. It can be used with thin coat plaster or drylining paper tape. Galvanised steel EN 10346 DX51D Z275.Installation Use appropriate fixings. Always..
Guide Price
Brand: Teco
Model and Size: 20mm - Engaging
Delivery Time: 1 - 2 days
20mm Galvanised Steel Drywall Feature Bead - Engaging is for use on thin coat plaster application to form a decorative shadow line at plaster edge, at door and window reveals and other joinery features. It can also be used to act as a neat divide between differing wall finishes. Made ..