80mm JCW Acoustic Batten 80C
Guide Price
80mm JCW Acoustic Batten 80C
Guide Price: £6.97 (£8.36 inc VAT)
700 or more £6.46 (£7.75 inc VAT)
1050 or more £6.04 (£7.25 inc VAT)
- Product Code: A1-1975
- Delivery Time: 5 - 7 days
- Brand: JCW (Tech. support: 08453402858)
- Model and Size: 80x42x1800mm
- Weight: 2.90kg
Our ratings on 02-07-2024:
4.7 out of 5 - Excellent
4.8 out of 5
80mm JCW Acoustic Batten 80C
Width: 42mm
Length: 1800mm
Weight: 2.9kg
JCW Acoustic Batten 80C is a 10mm pre bonded open cell, recycled polyurethane resilient layer to a 70mm timber batten for use on concrete subfloors. The JCW Acoustic Batten 80C offers an exceptional reduction in impact sound, whilst maintaining a high compression strength. They can be overlaid with an 18mm tongued and grooved chipboard and plywood or engineered hardwood flooring.
- Easy to install,
- Raised floor space can be used for installing services,
- Ideal for good impact sound improvement where height permits,
- In refurbishments: overlaid onto flat timber or concrete floors
- New build
- Refurbishments
- Domestic upgrade
- On concrete subfloors
- Sweep floor clear of debris,
- Position JCW Perimeter Edging Strip at the base of all perimeter walls,
- Lay a continuous run of JCW Acoustic Battens, foam side down, around the floor perimeter, leaving a 50mm gap between the battens and the walls,
- Lay mineral wool quilt between the battens,
- Lay the plasterboard plank to the battens, staggering the joints and ensuring that all short edges of plank rest centrally on a batten.
- Butt the plasterboard plank up to the perimeter edging strip,
- Lay the chipboard flooring sheets with the long edge across the battens. Short joints should be staggered and supported by extra sections of batten.
- Screw fix through the chipboard sheets, plasterboard plank and into the battens at 300mm centres, ensuring that no screws penetrate into the battens resilient foam layer.
- To ensure tight jointing, each tongue and groove is glued with JCW Waterproof PVA Adhesive. Chipboard can also be spot bonded to the layer of plank.
- Remove tongues and grooves from chipboard sheets at the perimeter to ensure that only square cut edges butt up to the JCW Perimeter Edging Strip,
- Any unavoidable gaps are filled with JCW Acoustic Sealant,
- The JCW Perimeter Edging Strip is folded over the chipboard floor and trapped under the skirting board the excess is then trimmed to finish flush to the skirting board,
- The completed floor should not be walked on for at least 48 hours to ensure the adhesive has fully cured.
JCW Acoustic Batten 80C had been tested in Building Research Establishment Ltd, an UKAS accredited laboratory.
Batten-80C-Datasheet.pdf
Guide Price
Brand: JCW
Model and Size: 250x250mm
Delivery Time: 2 - 3 working days
250x250mm Fire and Acoustic Downlighter Cover is designed to help maintain the fire resistance and acoustic integrity of ceilings. It is ventilated to reduce heat build up.CHARACTERISTICSPractical: The downlighter covers allow light fittings to operate without overheating.Resistant: the fire rating ..
Guide Price: £27.78
£33.34 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x1000mm - 1.20m2
Delivery Time: 2 - 3 working days
12mm JCW ImpactaLay Acoustic Mat is a remarkably cost-effective and one of the quickest and most effective acoustic solutions on the market. It increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors or false walls...
Guide Price: £36.31
£43.57 inc VAT
Guide Price
Brand: JCW
Model and Size: 2400x600mm - 1.44m2
Delivery Time: 2 - 3 working days
37mm JCW Acoustic Deck 37C is a 15mm resilient acoustic layer laminated to a 22mm T&G chipboard, designed for fitting direct to joist. Acoustic Deck 37 is specially designed for direct to joist fitment after existing timber floor has been removed. After removing existing timber floors, there is ..
Guide Price: £74.66
£89.59 inc VAT
Guide Price
Brand: JCW
Model and Size: 1200x1000mm - 1.20m2
Delivery Time: 2 - 3 working days
10mm JCW Impactalay 10 Acoustic Mat is a remarkably cost-effective and one of the quickest and most effective acoustic solutions on the market. It increases airborne sound insulation and reduces impact noise transmission so much that there is no need for the installation of false floors or false wal..
Guide Price: £26.75
£32.10 inc VAT
Guide Price
Brand: JCW
Model and Size: 600x600mm - 0.36m2
Delivery Time: 3 - 5 days
50mm JCW Noise Stopper Pad is an aluminium non-flammable foil covered pad with 2 layers of non-flammable sound absorbing acoustic mineral wool with a mineral loaded sound barrier mat core layer. This sound blocking pad designed to be laid on top of suspended ceiling grid tiles in offices and rooms. ..
Guide Price: £9.40
£11.28 inc VAT
Guide Price
Brand: JCW
Model and Size: 1.05x10m - 10.50m2
Delivery Time: 2 - 3 working days
5mm JCW Impacta Rubber Roll is Sound Insulation System for concrete floors, robust resilient under screed layer system. It is suitable for precast and solid concrete floors (minimum weight 300kg/m2). JCW Impacta Rubber is a tough, puncture-proof, heavy material designed for the professional buildin..
Guide Price: £93.82
£112.58 inc VAT